The resin transfer molding (RTM ) process, in which a thermosetting resin is injected into a mold cavity preloaded with a porous fiber preform, is a manufacturing method for producing advanced continuous fiber reinforced composite products with complex geometries. Numerical simulation of resin transfer molding process is an often needed tool in manufacturing design, in order to analyze the process before the mold is constructed. In this study, a numerical simulation of the resin impregnation process in RTM of composite materials is performed by using and modifying an existing simulation program. The parts that are molded in the simulations have their planar dimensions much larger than their thicknesses. Therefore, the mold filling process can be modeled as two dimensional by neglecting the variations along the thickness direction. The program is capable of simulating two-dimensional, isothermal impregnation processes through orthotropic fiber preforms of planar but complex geometries. The formulations of the physical problem, used in this study, were taken from the theory of macroscopic flow through anisotropic porous media. The formulated governing equation and boundary conditions are solved in a regular-geometry computational domain by transformation through boundary fitted coordinate system. The discretization for numerical solution is performed by the finite difference method. The current study extends the existing capabilities of the simulation program by enabling the simulation of impregnation through non-homogeneous fiber preforms. Furthermore, the capability to simulate injection from two gates (as opposed to a single gate injection that existed before) is developed and added to the program. Various one-dimensional impregnation simulations (as parametric studies) are performed to assess the influence of process parameters. Results are also compared with analytical solutions and found to be in agreement with them. Two-dimensional impregnation simulations are performed for a planar, complex geometry mold. The two-dimensional results are compared with experimental results from the literature and are found to be in acceptable agreement with them. In addition to the study of various parametric variations in two-dimensional impregnation, double-gate resin injection simulations are performed and discussed as well.

Composite materials have the potential to revolutionize life in the 21st century. They are contributing significantly to developments in aerospace, hydrogen fuel cells, electronics and space exploration today. While a number of composite material processing methods exist, resin transfer molding (RTM) has the potential of becoming the dominant low-cost process for the fabrication of large, high-performance products. RTM has many advantages over alternative processes, including the capability of producing complex 3D shapes with a good surface finish, the incorporation of cores and inserts, a tight control over fiber placement and resin volume fraction and the possibility of embedding sensors into manufactured components for structural health monitoring. Part of the reason RTM has not received widespread use is due to its drawbacks such as its relatively trial and error nature, race tracking, washout, high cycle time and void formation. The basic operation of the process involves loading a fiber reinforcement preform into a mold cavity, closing the mold, injecting resin into the mold and allowing the resin to cure. To study the resin transfer molding process and issues affecting it, a laboratory containing an experimental RTM apparatus has been established. The apparatus has a glass window to observe the mold filling process and can incorporate various mold shapes such as a quasi-2D panel, a 3-D rectangular section and a 3-D semicircular section. To characterize the flow through the molds a commercial CFD software has been used. This thesis describes the establishment of this laboratory and preliminary studies that have been conducted.

Banca: Herman Jacobus Cornelis Voorwald / Banca: Maysa Furlan / Banca: Sergio Frascino Muller de Almeida / Banca: Durval Rodrigues Junior / Banca: Paulo Roberto Mel / Resumo: Com o objetivo de ganhar competitividade no mercado internacional e contribuir para o desenvolvimento tecnológico no país, o presente trabalho apresenta a técnica de processamento de moldagem por transferência de resina (RTM), utilizada na fabricação de materiais compósitos estruturais e ainda pouco estudada no Brasil. Os compósitos processados por essa técnica apresentam maior fração volumétrica de fibras, melhor acabamento superficial e pouca ou nenhuma necessidade de acabamento do componente produzido. Este trabalho compreende a caracterização de compósitos produzidos com resina epóxi monocomponente RTM6 e o tecido não dobrável de fibra de carbono. Os compósitos produzidos pela Hexcel Composites foram analisados pela técnica de ultrassom C-Scan e os resultados mostraram que os laminados processados estão homogêneos quanto à impregnação. Ensaios mecânicos mostram que os laminados com tecido apresentam características comparáveis à dos compósitos produzidos em autoclave com maiores porcentagens de reforço. Em fadiga, os laminados apresentaram um alto e curto intervalo, com tensões próximas à de tração. Quanto ao comportamento térmico observou-se melhora nas propriedades com a adição do reforço de fibras de carbono, que promoveram o aumento da temperatura de transição vítrea (Tg). Quanto ao comportamento viscoelástico, foi observado a influencia da temperatura e freqüência no material. Considerando as propriedades mecânicas e térmicas, ambos os compósitos foram classificados como adequados à aplicação proposta. / Abstract: Aiming at gaining competitiveness on international market and contribute with technological development in the country, this work presents a processing technique of resin transfer molding (RTM), used to manufacture structural composites that Brazilian researches have yet few background. Composites processed by this method have a higher volume fraction of fibers, better surface finish, and requires little or none surface finish of the final component. This work includes the characterization of composites made with RTM6 monocomponent epoxy resin and carbon non-crimp fabric (NCF). Composites produced by Hexcel Composites were analyzed by C-scan ultrasound technique, which showed a homogeneous impregnation of the processed panels. Mechanical tests showed that RTM composites properties are comparable to those of autoclaving composites with higher fiber volume fraction. In fatigue, composites showed high and short interval, close to ultimate tensile strength (UTS), with an interval between 60-75% of UTS. Regarding the thermal behavior, it was observed an improvement in properties with the addition of carbon fiber reinforcement, which caused an increase in Tg. In regard to the viscoelastic behavior, it was observed the temperature and frequency influence on the material. Considering these mechanical and thermal properties, both composites are considered suitable for the application proposal.

No description available.

Vacuum-Assisted Resin Transfer Molding (VARTM) processes are becoming promising technologies in the manufacturing of primary composite structures in the aircraft industry as well as infrastructure. A great deal of work still needs to be done on efforts to reduce the costly trial-and-error methods of VARTM processing that are currently in practice today. A computer simulation model of the VARTM process would provide a cost-effective tool in the manufacturing of composites utilizing this technique. Therefore, the objective of this research was to modify an existing three-dimensional, Resin Film Infusion (RFI)/Resin Transfer Molding (RTM) model to include VARTM simulation capabilities and to verify this model with the fabrication of aircraft structural composites. An additional objective was to use the VARTM model as a process analysis tool, where this tool would enable the user to configure the best process for manufacturing quality composites. Experimental verification of the model was performed by processing several flat composite panels. The parameters verified included flow front patterns and infiltration times. The flow front patterns were determined to be qualitatively accurate, while the simulated infiltration times over predicted experimental times by 8 to 10%. Capillary and gravitational forces were incorporated into the existing RFI/RTM model in order to simulate VARTM processing physics more accurately. The theoretical capillary pressure showed the capability to reduce the simulated infiltration times by as great as 6%. The gravity, on the other hand, was found to be negligible for all cases. Finally, the VARTM model was used as a process analysis tool. This enabled the user to determine such important process constraints as the location and type of injection ports and the permeability and location of the high-permeable media. A process for a three-stiffener composite panel was proposed. This configuration evolved from the variation of the process constraints in the modeling of several different composite panels. The configuration was proposed by considering such factors as: infiltration time, the number of vacuum ports, and possible areas of void entrapment. / Ph. D.

Vacuum assisted resin transfer molding (VARTM) is a low cost resin infusion process being developed for the manufacture of composite structures. VARTM is being evaluated for the manufacture of primary aircraft structures, including foam sandwich composite materials. One of the benefits of VARTM is the ability to resin infiltrate large or complex shaped components. However, trial and error process development of these types of composite structures can prove costly and ineffective. Therefore, process modeling of the associated flow details and infiltration times can aide in manufacturing design and optimization. The purpose of this research was to develop a process using VARTM to resin infiltrate stitched and unstitched dry carbon fiber preforms with polymethacrylimide foam cores to produce composite sandwich structures. The infiltration process was then used to experimentally verify a three-dimensional finite element model for VARTM injection of stitched sandwich structures. Using the processes developed for the resin infiltration of stitched foam core preforms, visualization experiments were performed to verify the finite element model. The flow front progression as a function of time and the total infiltration time were recorded and compared with model predictions. Four preform configurations were examined in which foam thickness and stitch row spacing were varied. For the preform with 12.7 mm thick foam core and 12.7 mm stitch row spacing, model prediction and experimental data agreed within 5%. The 12.7 mm thick foam core preform with 6.35 mm row spacing experimental and model predicted data agreed within 8%. However, for the 12.7 mm thick foam core preform with 25.4 mm row spacing, the model overpredicted infiltration times by more 20%. The final case was the 25.4 mm thick foam core preform with 12.7 mm row spacing. In this case, the model overpredicted infiltration times by more than 50%. This indicates that the model did not accurately describe flow through the needle perforations in the foam core and could be addressed by changing the mesh elements connecting the two face sheets. / Master of Science

Les pièces situées dans des zones chaudes/tièdes (300-400°C) de l'avion sont actuellement en titane (mât moteur) ou en composite à matrice époxy (plenum). Comment pourrait-on diminuer la masse de ces pièces tout en évitant leur dégradation à hautes températures de fonctionnement ? Le projet TACT (Technologie pour Aérostructures composites Tièdes), porté par Nimitech Innovation® (Groupe LAUAK), propose une solution innovante consistant à mettre en oeuvre par voie RTM des pièces structurales tièdes à base de renfort en fibres de carbone (FC) et de matrice Cyanate ester (CE). Le choix de la matrice thermodurcissable CE est justifié par son caractère thermostable, c'est-à-dire sa capacité d'opérer en continu à de hautes températures de fonctionnement (avec une température de transition vitreuse Tg>300°C). Par ailleurs, elle possède la facilité de mise en oeuvre des époxydes du fait qu'elle s'adapte généralement bien aux paramètres du procédé RTM. Toutefois, l'exothermie élevée de la matrice CE lors de la réticulation implique un gradient de température dans la pièce composite et peut ainsi engendrer des problèmes de surchauffe. Les travaux scientifiques menés dans le cadre de cette thèse se focalisent sur la problématique de surchauffe de la résine pendant le processus de polymérisation très exothermique dans le moule RTM. L'objectif serait ainsi de maîtriser le cycle de cuisson du composite afin d'éviter tout problème d'emballement ou de dégradation pendant la réticulation de la matrice. Dès lors, la thèse s'organise de la manière suivante : dans un premier temps, le comportement thermocinétique de la matrice CE (pure et catalysée) est analysé pendant l'étape de réticulation, et ceci dans l'optique de contribuer à l'optimisation de cycle de cuisson lors de la mise en oeuvre du composite FC/CE par procédé RTM. Ensuite, les propriétés thermiques (capacité calorifique, conductivité, diffusivité) en fonction du degré d'avancement de la résine CE sont menés afin d'évaluer le gradient thermique régi par l'équation de la chaleur permettant de maîtriser la cuisson de la résine dans l'épaisseur. Par ailleurs, la vitrification de la matrice CE est étudiée par le suivi de la température de transition vitreuse Tg en fonction de la température et du taux d'avancement à l'aide de différents techniques de mesure (DSC, DMA, TMA). Enfin, une modélisation de la vitrification à l'aide du modèle Di-Benedetto permettra l'estimation de la température de la transition vitreuse Tg ∞ pour le réseau tridimentionnel entièrement réticulé. / Aeronautical parts which operate in high temperature area (300-400°C) are currently made of titanium (aircraft pylon) or composite materials based on epoxy matrix (plenum). In which extent the weight of these pieces could be reduced as well as avoiding their degradation when operating at these working temperature ranges? TACT project (Technologie pour Aérostructures composites Tièdes), overseen by Nimitech Innovation® (Groupe LAUAK), suggests an innovative solution based on the development of high performance composites parts reinforced by carbon fibers (CF) and cyanate ester matrix (CE) through RTM process. The CE resin belongs to the class of high-performance thermosetting polymers and is mainly chosen in this project due to its thermal stability when operating at high temperatures (with a glass transition Tg>300°C), as well as epoxy-like processability. However, the cross-linking reaction exhibits highly exothermic process, resulting in non-linear increase in internal temperature, which may cause a temperature overshoot. The scientific work carried out within this thesis focuses on the problem of overheating of the resin during the highly exothermic polymerization process in the RTM mold. The objective would thus be to control the curing cycle of the composite in order to avoid problems of runaway or degradation during the crosslinking of the matrix. Hence, the thesis is organized as follows: firstly, thermokinetic behavior of CE resin is analyzed during the crosslinking process in order to optimize the curing cycle. Secondly, thermal properties (heat capacity, conductivity, diffusivity) are identified as a function of the conversion degree in order to evaluate the thermal gradient covered by the heat equation making it possible to control the curing along the thickness of the composite. Moreover, the vitrification of the cyanate ester matrix is studied by monitoring the glass transition temperature Tg as a function of the temperature and conversion degree using different methods (DSC, DMA, TMA). Finally, Di-Benedetto model, a vitrification model, is chosen in order to identify the glass transition temperature Tg∞ of a full crosslinked resin.

Les matériaux composites ont connu ces dernières années une forte croissance, croissance aujourd'hui renforcée par les nouvelles normes européenne visant à diminuer les émissions CO2 d'ici 2020. La réalisation de pièces complexes peut poser de nombreuses problématiques de fabrication comme la formation de zones sèches, ou la création de distorsions géométriques. Les origines de ces problématiques sont souvent liées à un manque de connaissance et de maîtrise des phases d'imprégnation des renforts et de cuisson du matériau. L'amélioration de la robustesse des procédés nécessite d'avoir une connaissance fine des phénomènes physiques qui ont lieu lors de l'élaboration. Dans cette perspective, les procédés d'élaboration de matériaux composites ont été étudiés à travers la mise en place d'un démonstrateur de laboratoire dans le cadre du projet LCM Smart. Ce pilote d'injection a permis de valider des solutions d'instrumentation, à partir de capteurs innovants (OFS) développés en partenariat avec le laboratoire d'optique Hubert Curien.L'application de cette instrumentation dans le cadre du suivi du procédé RTM a démontré les capacités des OFS pour le suivi des caractéristiques physiques de la pièce (le front d'écoulement, la température, les déformations résiduelles et le degré de cuisson). La comparaison des caractéristiques mesurées avec des simulations numériques effectuées en collaboration avec ESI, a montré une bonne corrélation.Enfin, l'instrumentation a permis de mettre en évidence l'intérêt d'un outillage composite en HexTool pour la réduction des contraintes résiduelles liées à l'interaction outil/pièce.

Cette thèse s’intéresse à la fabrication de pièces composites par le procédé Resin Transfert Molding (ou RTM), appliquée à des tubes de protection thermiques. Plus particulièrement, cette thèse vise à démontrer la faisabilité d’utiliser ce procédé pour la fabrication cette pièce complexe. La phase d’imprégnation de préformes sèches est plus particulièrement étudiée. Après mise en oeuvre, cette pièce peut présenter des défauts tels que de la porosité ou des déplacements de plis constituant la préforme. L’objectif de cette thèse est donc de comprendre l’origine de ces défauts et de minimiser voire de d’empêcher leur apparition. Pour cela, une démarche expérimentale a été mise en place. Celle ci comprend la réalisation d’un pilote de laboratoire permettant d’appliquer différentes conditions d’imprégnation aux préformes considérées. La perméabilité des renforts considérés a aussi été évaluée à différentes échelles grâce à l’utilisation de moyen dédiés à l’échelle macroscopique (banc de perméabilité planaire et transverse), et grâce à l’utilisation d’un code de calcul se basant sur des images de tomographie synchrotron à l’échelle microscopique. Enfin, une analyse de la qualité des prototypes réalisés a été menée en suivant des procédures mises en place lors de ce projet et les résultats analysés et mis en relation avec les conditions de mise en oeuvre. Cette approche expérimentale est couplée aux simulations numériques de la phase d’imprégnation que nous avons aussi mise en oeuvre au cours de cette thèse. Par l’utilisation combinée de la simulation numérique et des essais expérimentaux, nous avons défini des critères estimant le risque d’apparition des défauts. Ces critères ont montré leur efficacité sur les solutions innovantes que nous avons proposées puisque répondant aux exigences du cahier des charges industriel. / This work concerns the manufacturing of composite parts using the Resin Transfer Molding (RTM) process. A major goal of this study is to test the feasibility of using this process to manufacture a thick tubular part with a complex shape. This study concerns the different stages of the process with an important focus on the injection step of dry preforms. The goal of this thesis is to understand the generation of manufacturing defect (mainly porosity and preform deformation) that possibly takes place during the injection step to avoid them. An experimental procedure is proposed. An experimental setup was developed to study the influence of the different process parameters on the quality of the composite parts. The determination of the longitudinal and through the thickness permeabilities was conducted experimentally on sheared and un-sheared samples. An alternative technique to estimate the permeability is presented based on simulation software using X-ray tomography images at the microscale. At last, a quality control procedure was developed and applied to the tubes manufactured within this project. This experimental work was compared to numerical simulations of the injection stage. Using both numerical simulations and experiments, criteria on process and material parameters to predict the quality of the tailored parts are presented. Those criteria are successfully compared to experimental data and were applied to design innovative injection solutions that meet industrial specifications.

Resin infusion of composite parts has continually been reaching to achieve laminate quality equal to, or exceeding, the quality produced with prepreg in an autoclave. In order for this to occur, developers must understand the key process variables that go in to producing a laminate with minimal void content. The purpose of this research is to continue efforts in understanding 1) the effect of process conditions on the resultant void content, with a focus on resin infusion flow rate, 2) applying statistical metrics to the formation, location and size of voids formed, and 3) correlate these metrics with the local mechanical properties of the composite laminate. The variation in dispersion and formation of micro-voids and macro-voids varied greatly between the rates of flow the infusion occurred, especially in the non-crimp carbon fiber samples. Higher flow rates led to lower volumes of micro-voids in the beginning section of the carbon fiber laminates with macro-voids being introduced approximately half-way through infusion. This was determined to have occurred decreasing pressure gradient as the flow front moved away from the inlet. This variation in void content per location on the laminate was more evident in the carbon fiber samples than the fiberglass samples. Micro-voids follow void formation modeling especially when coupled with a pressure threshold model. Macro-void formation was also demonstrated to correlate strongly to void formation models when united with void mobility theories and pressure thresholds. There is a quick decrease in mechanical properties after the first 1-2% of voids signaling strength is mostly sensitive to the first 0-2% void content. A slight decrease in SBS was noticed in fiberglass laminates, A-F as v0 increased but not as drastically as represented in the NCF laminates, G and H. The lower clarity in the exponential trend could be due to the lack of samples with v0 greater than 0% but less than 1%. Strength is not well correlated to void content above 2% and could possibly be related to void morphololgy.