Spelling suggestions: "subject:"tribocorrosion"" "subject:"tribocorrosión""
1 |
Tribo-Corrosion of High Entropy AlloysShittu, Jibril 12 1900 (has links)
In this dissertation, tribo-corrosion behavior of several single-phase and multi-phase high entropy alloys were investigated. Tribo-corrosion of body centered cubic MoNbTaTiZr high entropy alloy in simulated physiological environment showed very low friction coefficient (~ 0.04), low wear rate (~ 10-8 mm3/Nm), body-temperature assisted passivation, and excellent biocompatibility with respect to stem cells and bone forming osteoblast cells. Tribo-corrosion resistance was evaluated for additively manufactured face centered cubic CoCrFeMnNi high entropy alloy in simulated marine environment. The additively manufactured alloy was found to be significantly better than its as-cast counterpart which was attributed to the refined microstructure and homogeneous elemental distribution. Additively manufactured CoCrFeMnNi showed lower wear rate, regenerative passivation, less wear volume loss, and nobler corrosion potential during tribo-corrosion test compared to its as-cast equivalent. Furthermore, in the elevated temperature (100 °C) tribo-corrosion environment, AlCoCrFeNi2.1 eutectic high entropy alloy showed excellent microstructural stability and pitting resistance with an order of magnitude lower wear volume loss compared to duplex stainless steel. The knowledge gained from tribo-corrosion response and stress-corrosion susceptibility of high entropy alloys was used in the development of bio-electrochemical sensors to sense implant degradation. The results obtained herewith support the promise of high entropy alloys in outperforming currently used structural alloys in the harsh tribo-corrosion environment.
|
2 |
Tribocorrosion behaviour of copper and zirconia reinforced nickel-titanium shape memory composites.Molele, Tebogo Amelia. January 2013 (has links)
M. Tech. Metallurgical Engineering. / StudIes the tribocorrosion behaviour of copper-nickel-titanium shape memory composite reinforced by zirconia,synthesized through powder metallurgy process. The research aims to achieve the following objectives: 1. Study the tribocorrosion mechanisms of the composites in NaCl solution (typical human body fluid). 2. Investigate the tribocorrosion mechanisms of the composites in other environments typical of some engineering applications.The proposed study on incorporating zirconia into the matrix NiTiCu through powder metallurgical process and investigations of the phenomenon of joint wear-corrosion synergism occurring in sodium chloride considered typical of human body system and sulphuric acid environment typical of wide range engineering applications is therefore very novel. It is therefore aimed that information on the tribocorrosion behaviour of NiTiCu as well as with zirconia incorporation will form basis for typical compositional formulation approaches for improved bio-tribocorrosion improvement in biomedical applications and actuators used in other engineering applications.
|
Page generated in 0.0415 seconds