Made available in DSpace on 2014-07-29T15:03:31Z (GMT). No. of bitstreams: 1 Dissertacao Michelly L Borges 2009.pdf: 835129 bytes, checksum: 13f31a796619274490f950cf6ef9d999 (MD5) Previous issue date: 2009-12-14 / Due to the small number of studies about the process of production of the concrete dosed in central, as regards the type of employed mixture, this inquiry looked to contribute to the assessment of quality of concrete produced in mixing plant and metering plant. The principal objective of the work was checking if the form of mixing of the concrete can affect your characteristics in hardened state (compressive strength), for that, there was compared the quality of the concrete produced in metering plant and mixed in truck mixer in relation to the mixing plant. As the sample was taken a work, where they had installed a metering plant and a mixing plant, which together produced 300.000 m³ of concrete with the same materials. Inside the proposed objective, also were quantified statistically the existent types of concrete in the same truck mixer, using as the parameter the compressive strength of concrete produced in the metering plant. In the end, it was possible to conclude that the mixing plant produce a concrete of better quality with a less standard deviation than the metering plant. Was also observed a significant variability inside the truck mixer, which made the division of the concrete possible in five group, with different resistances' / Em razão do pouco número de estudos relacionados ao processo de produção do concreto dosado em central, no que tange ao tipo de mistura empregada, esta pesquisa busca contribuir com a avaliação da qualidade de concretos produzidos em centrais misturadoras e centrais dosadoras. O objetivo principal do trabalho foi o de verificar se a forma de mistura do concreto pode afetar suas características no estado endurecido (resistência à compressão), para isso, foi comparada a qualidade do concreto produzido em central dosadora e misturado em caminhão betoneira em relação aos produzidos em central misturadora. Como amostra tomou-se uma obra, onde havia instalada uma central dosadora e uma central misturadora, que juntas produziram 300.000 m³ de concreto a partir dos mesmos materiais. Ainda dentro do objetivo proposto, foram também quantificados estatisticamente os tipos de concreto existentes em um mesmo caminhão betoneira, produzidos na central dosadora e tendo como parâmetro a resistência à compressão. Ao final, foi possível concluir que as centrais misturadoras produzem um concreto de melhor qualidade com um menor desvio padrão do que as dosadoras. Foi observada também uma variabilidade significativa dentro do caminhão betoneira, o que tornou possível a divisão do concreto em cinco grupos, com resistências distintas.

This diploma thesis deals with a design and optimization of mixer truck gearbox bearing arrangements. The gearbox is an important part of mixer truck. Major emphasis is put on design of main bearing which is a key component of the gearbox because of high load applied on it. Two basic criterions were considered in main bearing design – dynamic radial load capacity and contact stress in contact of roller and raceways. Developed two-stage optimizing algorithm is based on standard bearing and allows to design new bearing which is specialized for carrying output shaft of mixer truck gearbox.

The subject of my diploma thesis are selected parts of the construction technology project of the psychiatric clinic of the University Hospital Brno based on the provided project documentation. It is an extension of a new six-storey building to the existing buildings. The thesis contains a technical report to the construction technology project, the coordination situation of the construction, the situation of wider transport routes, time and financial plan by objects, study of the realization of the main technological stages, a site equipment design, a design of a machine set, technological regulation for monolithic structures, quality control and testing plan of monolithic structures, noise study and selected documents for LEED certification.