In this study, loss and loading characteristics of compressor tandem blades are evaluated. Whole study was focused on change of the total camber so called turning angle. Effects of camber change were investigated in terms of loss and loading characteristics. Methodology was increasing overall camber first by aligning angular positions of blades and second, if required, using more cambered airfoils. 2-dimensional cascade flow CFD analyses were performed to obtain loss-loading information of different tandem blade combinations. Acquired results were compared with the classical axial compressor blades&rsquo / loading and loss characteristics which were obtained from literature. Results showed that most of the time tandem blade configuration performed better than the single blade counterpart in 2-dimensional cascade flow. Lastly, to clarify the benefit of the study and present the gained performance in numbers, only one cascade flow CFD analysis was performed for a classical single compressor blade. Loss and loading results were compared with the tandem blade counterpart where single and tandem configurations both having the same degree of camber. It was clearly seen that tandem blade performed better again.