1 |
Vibration energy harvesting, biomimetic actuation, and contactless acoustic energy transfer in a quiescent fluid domainShahab, Shima 07 January 2016 (has links)
This work is centered on low-frequency and high-frequency multiphysics problems of piezoelectric structures submerged in a quiescent fluid domain for the applications of vibration energy harvesting, biomimetic actuation, and contactless acoustic energy transfer. In the first part of this research, Macro-Fiber Composite (MFC)-based piezoelectric structures are employed for underwater mechanical base excitation and electrical biomimetic actuation in bending mode at low frequencies (the fundamental underwater bending resonance being in the infrasonic frequency range). The MFC technology (fiber-based piezoelectric composites with interdigitated electrodes) exploits the effective 33-mode of piezoelectricity, and strikes a balance between structural deformation and force levels for actuation to use in underwater locomotion, in addition to offering high power density for energy harvesting to enable battery-less aquatic sensors. Following in-air electroelastic composite model development, the fundamental research problem is to establish semi-analytical models that can predict the underwater dynamics of thin MFC cantilevers for different length-to-width aspect ratios. In-air analytical electroelastic dynamics of MFCs is therefore coupled with added mass and nonlinear hydrodynamic damping effects of fluid to describe the underwater electrohydroelastic dynamics in harvesting and actuation. To this end, passive plates of different aspect ratios are tested to extract and explore the repeatability of the inertia and drag coefficients in Morison’s equation. The focus is placed on the first two bending modes in this semi-empirical approach. In particular, electrode segmentation is studied for performance enhancement in the second bending mode. Additionally, nonlinear dependence of the output power density to aspect ratio is characterized theoretically and experimentally in the underwater base excitation problem. In the second part of this work, Ultrasonic Acoustic Energy Transfer via piezoelectric transduction is investigated theoretically and experimentally. Contactless energy transfer using acoustic excitation offers larger distances of power transmission as compared to well-studied inductive method. Various transmitter configurations (e.g. spherical, cylindrical, and focused) are explored for energy transfer to a piezoelectric receiver bar (operating in the longitudinal/thickness mode) that is shunted to a generalized resistive-reactive circuit. Fixed-free and free-free mechanical boundary conditions of the receiver are explored in detail. The resulting multiphysics analytical model framework is compared with finite-element simulations and experiments conducted in fluid (water and oil). Optimal piezoelectric receiver material and electrical loading conditions are sought for performance and bandwidth enhancement.
|
2 |
Theoretical Parametric Study of Through-Wall Acoustic Energy Transfer SystemsWinnard, Thomas Johan 19 May 2021 (has links)
Technological advances require novel solutions for contactless energy transfer. Many engineering applications require unique approaches to power electrical components without using physical wires. In the past decade, awareness of the need to wirelessly power electrical components spawned many forays into the field of wireless power transfer (WPT). WPT techniques include capacitive energy transfer, electromagnetic inductive power transfer, electromagnetic radiative power transfer, electrostatic induction, and acoustic energy transfer. Acoustic energy transfer (AET) has many advantages over other methods. These advantages include lower operating frequency, shorter wavelengths enabling the use of smaller sized receiver and transmitter, extended transmitter-to-receiver distance therefore more manageable design constraints, achieving lower attenuation, higher penetration depth, and no electromagnetic losses. Most AET systems operate in the ultrasonic frequency range and are more commonly referred to as ultrasonic acoustic energy transfer (UAET) systems.
Through-wall UAET systems are constructed of a transmitter bonded to a transmission elastic layer, which in turn is bonded to a receiver. The transmitter and receiver layers are constructed of a piezoelectric material. Piezoelectric materials behave according to the piezoelectric effect, which is when a material generates an electric charge in response to mechanical strain. The transmitter utilizes the reverse of the piezoelectric effect. A sinusoidal input voltage is applied to the transmitter, inducing vibrations in the transmitter. The vibration-induced acoustic waves emanating from the transmitter travel through the initial bonding layer, the transmission layer, and the final bonding layer to the receiver. In turn, the acoustic waves cause the receiver to deform and undergo strain. This induces a flow of charge in the receiver, which is an electric current. The receiver feeds current to a resistive load. In this manner, energy is acoustically transferred between two transducers without wires. The performance of UAET systems can be evaluated based on power transfer efficiency, voltage magnification, and input admittance.
UAET systems require extensive modeling before experimental assembly can be attempted. The analytical models of UAET are either based on the mechanics of the constitutive relations of piezoelectricity and solid mechanics or using equivalent circuit methods. The equivalent circuit method approximates the physics of the UAET system with electrical assumptions. The mechanics-based method is the most comprehensive description of the physics of all the intermediate layers in a UAET system.
The mechanics-based method has been based on the assumption that the UAET system is operated in the thickness mode of vibration, i.e., piston-like vibration mode where the transmitter and receiver disks vibrate only in the thickness direction. This poses an issue for disks with aspect ratios between 0.1 and 20 because the piezoelectric transducers vibrate in both the radial and thickness modes.
In addition to this assumption, most of the works on UAET models only have accounted for the piezoelectric and transmission layers. The effects of the bonding layers were not considered. Bonding the piezoelectric layers to the transmission layer introduces epoxy material with mechanical properties that are not accounted for. The epoxy layers are extra barriers to the transmission that introduce attenuation and alter the vibrational and acoustical behaviors of the UAET system.
Investigations into UAET commonly focus on metal through-wall applications. Alternate transmission layer materials are not investigated and the impact of varying mechanical properties on the performance of a through-wall UAET system has not been comprehensively studied. Even with the metal transmission layers, the impact of the metal thickness has not been extensively investigated thoroughly.
This work addresses the issues of the thickness-mode assumption in UAET modeling, the effects of epoxy layers, the impacts of the metal layer geometry, and the performance of UAET systems with alternate transmission layer materials. Particularly, (1) we showed that the thickness-mode assumption, that has been used in the UAET modeling leads to inaccurate results. (2) We modified the available acoustic electro- elastic theoretical modeling to include the effects of radial modes as well as the epoxy bonding layers. (3) We showed that the geometry of the elastic/metal layer requires optimization for peak system efficiency. (4) The results show that using alternate transmission layer materials impacts the performance of UAET systems. The results of this work were investigated using an improved 5-layer analytical model and finite element modeling in COMSOL Multiphysics. / Master of Science / Wireless power transfer (WPT) is an innovative solution to the problem of powering sophisticated technological applications. Such instances include the powering of implanted medical devices, recharging inaccessible sensor networks, and wireless powering of components in sealed containers. Acoustic energy transfer (AET) is a feasible WPT method that addresses these needs. AET is based on the propagation of acoustic waves to a piezoelectric receiver which converts the vibrations caused by incident acoustic waves into electrical energy. Most AET systems operate in the ultrasonic frequency range, and so AET can also be referred to as ultrasonic acoustic energy transfer (UAET). Through-wall UAET systems are constructed from a transmitter that is bonded to a transmission elastic layer. The transmission layer is bonded to a receiver. The transmitter and receiver are made of a piezoelectric material.
This thesis addresses the modeling process of through-wall UAET systems. In previous works, the fundamental assumption has been that such systems vibrate purely in the thickness mode. Additionally, other investigations did not comprehensively analyze the effects of the bonding layers, ascertain the performance of non-metal transmission layers, or provide practical insight on the effect of the resistive loading on such systems. This work addresses all these issues with a mathematical framework and finite element modeling results.
|
Page generated in 0.0977 seconds