The subject of this diploma thesis is the design of exhibition gallery in the city center of Brno. The exhibition gallery consist of exhibition rooms, depositories, lecture hall, café, VIP room, entrance and communication spaces, hygienic facilities for visitors and employees, administrative premises of the gallery, air-conditioning and heating machinery. The SO01 object is processed in detail, the object SO02 is processed in the form of a study. Design of the exhibition gallery is based on the requirements of the student competition, the sponsor is Xella CZ, s.r.o. SO01 is designed as a four-storey building with three above-ground and one underground floors. The building has an exhibition area, a lecture hall, a café, a VIP room, entrance and communicative spaces, hygienic facilities for visitors and employees, air-conditioning machinery. The supporting structure of the building is designed as an assembled, prefabricated, reinforced concrete skeleton. Ceiling structures are designed as SPIROLL 250 mm pre-stressed ceiling panels. The facade is designed as two-layer ventilated. The exhibition gallery is designed with a single-layer flat vegetation roof.

The diploma thesis deals with a new construction of a sports complex facility in Žďár nad Sázavou, Vysočina region. It aims to develop project documentation for construction work. The building is located near the town’s centre, on the unconstructed land under the town’s ownership. The object is supposed to serve as a facility for athletes. The building’s plan is regularly-shaped, formed to the letter “L”. It has two above-ground and one underground floors. In the object, there are a wellness area, gym, dressing room, restaurant, administrative part, and an apartment for the manager of the building. This is a classic brick building, which is based on both strip foundations and square footings. Bearing perimeter walls in the underground floor are formed from lost formwork. Bearing perimeter walls in the above-ground floors are formed from Porotherm cut ceramic blocks. The ceilings are made of Spiroll panels. Partition walls consist of Porotherm non-bearing cut ceramic blocks. The object is roofed by a flat single-skin roof and a vegetation roof. All external walls are insulated with a contact thermal insulation system.

The subject of my master´s thesis is a project of a new sports center in Havlíčkův Brod in Humpolecká street on plot no. 2709/3 and 2709/4. The land is sloping and its area is 14 849 square meters. The building has two overground floors and one underground floor. Vertical bearing constructions are designed from the monolitic ferroconcrete columns. Space between colmuns is made up of ceramic blocks. In the underground floor the space is made up of monolitic reinforced concrete. The vertical peripheral structures are provided with an insulation system with ventilated space. The horizontal bearing structures are designed as a monolitic reinforced concrete slabs. The roof is designed single – layer vegetation area. The roof over sports hall is sloping made up of wooden trusses. In south-eastern side of sports centre is designed restaurant with its technical background. In the underground floor there is relaxation part with swimming pool, saunas and massages. The rest of sports center is made up of technical and hygienic background for visitors and employees, and sports grounds, for example badminton courts, climbing wall, squash courts, fitness and 4 sports rooms.

The project documentation, processed in the framework of the diploma thesis, solves the new building of the administrative building of the building company in the village Lukov u Moravských Budějovic. The building is made of traditional brick technology therm tl. 50 cm, without insulation, ceilings are reinforced concrete, flat roof, vegetation. Vegetation is also part of the facade of the building, which at the same time serves as a root cleaner. The philosophy of the whole design is to create a high-quality working environment for building company employees, a pleasant environment for customers and to best solve the environmental footprint of the building. The building is designed as a modern office building, with space for leisure activities of staff and their visits, taking into account the responsible approach to the development industrial site and the surrounding nature. The building efficiently manages potable, rain and wastewater, the envelope of the building, and the individual structures are designed to make the entire building as energy-consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.

The subject of this diploma thesis is a proposal of the veterinary clinic in Pardubice. The object consists of 3 rectangles, where zverimex is connected to the veterinary clinic. Objects of the zverimex are veterinary clinic are designed as barrier-free. Object SO01 is partly solved as a two-storey, non-cellar. In the first part of the clinic there is a shop of zverimex with office and stock of rectangular shape. In the second part there is a reception for a veterinary clinic with a distinct entrance from where access is to of individual surgeries. In the inner part, there are offices of doctors, such as operating theaters, preparation rooms, CT, RTG, sono / endo / laparo, a laboratory connected with the infectious ward, a rehabilitation center and individual pet boxes. On the 2nd floor there are wardrobes and social facilities for the staff of the clinic with offices and day room, from where it is possible to enter the outdoor terrace. Hygienic facilities for visitors to the clinic are located in the entrance hall. For zverimex staff is designed at the back of the shop, the staff of the clinic is part of the closets in the 1st floor and 2nd floor. The construction system is a wall with a flat vegetation roof passing into the terraces on the terraces above the 1st NP, the roof above the entrance and over the 2nd NP, zverimex with the roof unobstructed. Ceiling structures are designed as pre-tensioned SPIROLL 320 mm ceiling panels. The exterior of the building of the clinic, which extends only to the 1st floor, is lined with red brick tiles and in the part of the building above which is the 2nd floor, the outside wall is lined with brick-gray cladding.

This master thesis elaborates the project documentation for the construction of an office building in Krnov city, located in the Moravian-Silesian region. The office building has four utility above-ground floors and one underground floors serving as underground garages. There is a cafe, stationery, showrooms and office space with sanitary facilities. The construction system is designed as a monolithic reinforced concrete skeleton. Vertical infill constructions are made of brick technology from Porotherm ceramic blocks. The ceiling structures are made of filigree panels with hidden steel girders, which are embedded with concrete layer. The basement and the basic structure of the house is designed as a white tub. The building is covered with vegetation roof. The design emphasized increased comfort in use and the overall modern concept of an office building. Overall, the building is designed to the required values for a near zero energy building.

The subject of the diploma thesis is the processing of the construction-technical part of the project documentation for the construction of a new kindergarden building in the town of Králíky. The building is divided into two parts - part of the kindergarten and part of the kitchen and laundry facilities. Part of the nursery school consists of three departments, communication space, multipurpose hall and administrative space. In the second part is a cloakroom for staff, kitchen with facilities, laundry and utility rooms. Both parts have separate main entrances. The building consists of two floors and one underground floor. Above part of the nursery school there is a sloping saddle roof structure consisting of wooden nailed trusses. Above the farm part there is a flat single-skin roof with a vegetation layer. The foundation structure under the walls of the building is formed by foundation strips, under the columns the foundation structure is formed by foundation feet. The vertical load-bearing structures are masonry from lime-sand masonry blocks in the above-ground part of the building and in the underground part of the building the vertical load-bearing structure is formed by fittings made of permanent formwork filled with reinforced concrete. Horizontal load-bearing structures are solved by prestressed cavity ceiling panels. The whole building is insulated. In the above-ground part of the nursery school is used contact thermal insulation system with pasty plaster, in the above-ground part of the remaining part of the building is used ventilated facade with fiber-cement facade boards

The diploma thesis processes project documentation for the construction of a hotel building with a restaurant facility, which is situated on the outskirts of the western undeveloped part of the regional town Jihlava. The building has three floors and is covered by flat roofs. The hotel meets the conditions of a four-star (****) economic standard. It is designed with 24 accommodation units with a capacity of total 52 persons (4 persons with reduced mobility on the 3rd floor) and restaurant service for 92 guests, social facilities and kitchens. The apartments and guest rooms are located on the 2nd and 3rd floor. On the ground floor there is a representative space of the hotel composed of the entrance hall with reception , space for hotel management, space for technical facilities of the building and restaurant with its own kitchen. The building meets the requirements for zero-energy buildings with a combination of a high-quality construction solution with thermal insulation of building and other technological solutions such as photovoltaic power plants or deep boreholes for stepping pump heating The overall character of the building is emphasized by its architectural design in the light of modern lining of the ventilated facade using cement-fiber boards, whose two-color articulation emphasizes both simplicity and shape function of the building. This solution is combined with large glazed areas that give the building a feeling of spaciousness and evocative cleanliness.

The thesis is dealing with the proposal and processing of project documentation of the Wipeout hotel with the wellness. The proposed object is located in the uptown of Jedovnice. It is a four-storey basement building with vegetation roof and five pitched gabled roofs. The object is visually divided into two parts. The first part is covered with a chipped stone facade. The second part is covered with ventilated facade of wooden blocks of Nordic pine. The foundations of the building are reinforced concrete. Framework, peripheral and dividing walls are designed from POROTHERM system. Ceiling structures are reinforced concrete. The visual idea is the Nordic style, that fits into the surrounding landscape. The object consists of three operating parts namely a restaurant, wellness centre and temporary accommodation.

The aim of this master´s thesis is the elaboration of project documentation for kindergarten with almost zero energy consumption. The project consists of three main parts. The first part is devoted to the civil engineering design of the building. The building is designed regarding to architectural expression, quality of made and type of use. The kindergarten is designed with capacity of 48 children split into two departments. The second part is devoted to the design of HVAC systems. The building uses mechanical ventilation with heat recovery, heating is provided by two gas boilers and the need of electricity is provided by a photovoltaic system. Captured rainwater is used effectively. The third part values the building regarding the method of multi–criteria analysis. For this evaluation uses national method SBToolCZ.