11 |
Minipivovar ve Vyškově / Minibrewery in VyškovZvolský, Dalibor January 2014 (has links)
The master’s Thesis – Minibrewery in Vyškov, has a form of project documentation which contains relevant requirements according to valid regulations. The proposed building is situated on the plot number 2123/72 in the city Vyškov. It is a detached building which stands separately on the flat terrain. It is a two-storey building with partial basement. It is formed from three units – a minibrewery, a brasserie with kitchen and an administrative part. It is made of monolithic reinforced concrete frame, brick blocks with vegetative flat roof. The upper level attic gable is at the height of 8,880 meters. The seminar paper – minibrewery in Vyškov – is a part of the Master’s Thesis.
|
12 |
Přestavba Janečkova mlýna / Reconstruction of the Janeček millOwczarzy, Denis January 2014 (has links)
The task of this diploma thesis was the development of construction documents for the implementation of project, icluding project specialization. This is a rebuilding of the existing mill and it´s conversion to the object. Proposed reconstruction is solved with a sense of highlighting the exist building and expressing his dominance and function in an environment, where the building is located. From the original state was preserved only main building in historical style, and in contrast to this building were proposed two smaller objects with the background. The object is used as a pension for the accommodation for persons, restaurant and also provides rooms for seminars and meetings. Due to a brooklet flowing in front of the building and location of pension between the spa´s and city parks is the use of this building more than suitable.
|
13 |
Areál "relax" / Resort "RELAX"Remsová, Pavla January 2016 (has links)
This thesis describes the design of the recreation grounds, which consists of a main building of a restaurant and six holiday cottages. The plot is also a tennis court. The restaurant is a two-storey building without a basement. All the cottages are single storey and cellar. Restaurants device is designed for a maximum capacity of 70 people. Total capacity of the entire complex is 30 beds. The restaurant is focused on the northern part of the land and buildings of six holiday cottages on the south side. Restaurant is designed as a brick structure with a contact insulating system. Partitions are designed as plasterboard. The ceiling is designed as a monolithic reinforced concrete slab. Part of the roof is designed as a pitch roof truss recognized. The largest area of flat roof occupies roof vegetation. Part of the restaurant is walk-terrace. The cottages are designed masonry with contact insulating system. Partitions are designed as plasterboard. Roofs are designed as counter recognized truss. The thesis contains drawings and technical documentation and it is composed as an implementation project.
|
14 |
Víceúčelové kulturní centrum / Multipurpose Cultural CentreKervitcer, Marek January 2017 (has links)
The theme of the diploma´s thesis is a new building of a multipurpose cultural centre in Veselí nad Moravou, district Hodonín. Structural system consists of a monolithic reinforced concrete construction and a sand-lime masonry. Roof is designed as a flat roof and a flat vegetation roof. The vertical communication space is solved by reinforced concrete staircases and elevator. The building is located near the elementary art school.
|
15 |
Bytový dům / Apartment houseAntoš, Jan January 2014 (has links)
The master´s thesis "Apartment house" is in form of project documentation containing all appropriateness in accordance with valid regulations. The house is designed as a detached house and without a cellar. The house is rectangular dimension, with a flat vegetation roof. The house has four floors with loggias, balconies and terraces. The house has 10 housing units. On the first floor is the accessory apartments: bicycle room, technical room, cellar room and garage. In the house is projected a lift. The house is made of brick system with a contact insulated system. The part of thesis is a heat-technical opinion, calculations staircase and foundation construction.
|
16 |
Novostavba farního kostela v Brně-Líšni / Parish church, Brno - LíšeňJurák, Vítězslav January 2015 (has links)
This diploma thesis, called „Parish church, Brno-Líšeň“, is compiled as documentation for building construction. There is one complex building situated in slope. Therefore it consists of one partly underground floor and first floor. It is divided into three sections. Central part is designed as round-shaped body of the church with tower in the southern part of the church. Shed roof has an angle of 7° for body and an angle of 13° for tower. From the western side there is an administrative area connected to the church and from eastern side there is a community area which is supposed to be used as residential premises. Roof of both these parts is constructed as flat vegetative roof. Structural design is systemic, Velox. Foundation construction combines concrete and ferro-concrete belts and footing.
|
17 |
Zdravotnické středisko Hlinsko / Medical center HlinskoPilný, Ondřej January 2018 (has links)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
Page generated in 0.2806 seconds