This master thesis deals with position of the maintenance in the company structure and with modern management approaches. One of the highest levels of maintenance is the proactive maintenance, which is using the technical diagnostics to find out the causes of failures. The most inportant in case of machines are vibrodiagnostics and thermodiagnostics, which are going to be applied on the motors in company Bosch Diesel s.r.o.

This master's thesis deals with vibrodiagnostics and its use for monitoring of the vibration transmission during grinding of large shafts at Siemens Electric Machines s.r.o. based in Drásov. Diagnostic system for machine tools testing was designed as well as a measurement methodology, which is used to detect the vibration transfer from the grinding spindle to the workpiece. Influences that affect the quality of the ground surface were determined, based on evaluation of measured data. The last part is dedicated to a proposal of a diagnostic and measuring system.

Master‘s thesis deals with maintenance and related technical diagnostics of machine tools. Diagnostics methods on which is the thesis focused are vibrodiagnostics, tribodiagnostics and electrodiagnostics. Work includes design of diagnostic system and measurement of vibration and electrical parameters of the machining center. Based on given results from data evaluation, further steps in predictive maintenance and usage of technical diagnostics for machine tools are recommended. Within tribotechnical diagnostics, the thesis is based on evaluation of long-term monitoring of process liquid status, which was used in several machining machines. A procedure for the measurement of selected parameters is proposed and periodical liquid status checks are established.

This master’s thesis deals with online diagnostics of the machine tool and marginal analysis of surface texture. The first part of the thesis deals with problems theoretically, there are described the machine tools, maintenance, methods of technical diagnostics, specifically online vibrodiagnostic systems and an overview of profile and area parameters. In the practical part, two test samples created under ideal and degraded conditions. In the practical part, two signal processing processes under ideal and degraded conditions are compared using signal analysis from an online vibrodiagnostic system and surface texture analysis. Part of the work is the evaluation of the performed analyzes and recommendations for practice.

The presented doctoral thesis is focused on solving reliability of operation and optimization of maintenance of rotary machines. In the theoretical part, the RCM method is analyzed in detail including several available modifications of this method. Furthermore, the most commonly used methods of technical diagnostics are presented. The practical part is focused on the design of a new methodology based on the RCM method.

The main target of this master’s thesis is to focus on methods of analysis of vibration signals in electric machines. To get know the basic principles of the diagnostics methods, is important to clarify origin of the vibration signals and the impact they have. The selected methods were tested practically by measurement on electric machines. Measured data were processed in program LabVIEW. In this thesis were created programs which actually can be aplicated for complete vibrodiagnostics of electric machines in particular induction motors. The basic evaluation of vibration are the RMS value, Crest factor, time course and power spectrum. Results of this thesis are used to demonstrate how quickly and effectively can be vibration signals from electric machines evaluated.

The goal of the thesis was applying multiparametric diagnostics to determine the state and wear of a high-speed milling machine. In the theoretical section, selected areas of multiparametric diagnostics have been described as well as a significant focus on vibrodiagnostics. The chosen methods for the practical section were incorporated into the group “metrological diagnostics”. Several different types of measurements have been performed on the designed test piece. The measurements were analyzed and lead to these specific results: a drawing of the test piece, a structured methodology for evaluating the test piece, recommendations for diagnostics of the specific machine, and proposals for the future development of the field of metrological diagnostics.

The thesis is focused on multiparametric diagnostic of generators at the Dukovany nuclear power plant. One generator was chosen for the thesis and it was examined especially from the practical point of view. The thesis describes current state of the issue with focus on noise diagnostics, vibrodiagnostics and electrodiagnostics. The emphasis is on the system approach of the solution. In the practical part an experiment is designed, described and evaluated. Attention is paid to the conclusions of the performed vibrodiagnostics and noise diagnostics. Data sets are evaluated separately and the relationship between the two diagnostic methods is analyzed. Furthermore, the data set from electrodiagnostics is evaluated and dependencies of electrical diagnostic quantities on other quantities are described. Trends in electrical diagnostic quantities are also monitored. Conclusions and recommendations are formulated at the end of the thesis. It is stated that using multiparametric diagnostics to assess the status of generators in power plants is still in its beginning and that the conclusions of the submitted thesis will contribute to the developmnet in this area.

This master's thesis deals with order analysis. The first part of the thesis describes common methods for order analysis and methods for processing tacho and vibration signal. The second part contains a brief description of some open source tools for order analysis focusing on Sound and Vibration Measurement Suite (SVMS) package for LabVIEW by National Instruments company. The main purpose of the thesis has been designing and realization of own library for order analysis as a plugin for development tool LabVIEW. In the library, there are implemented methods for order analysis including basic functions for processing vibration and tacho signal. Their brief description with manual for its usage is in the third part of the thesis. In the last chapter, implemented functions are compared with those, which are implemented in SVMS by National Instruments, using both simulated and real data.

This master thesis deals with the proactive diagnostics and monitoring of state of the three phase asynchronnous motors in industrial company Bosch Diesel Jihlava. In master thesis is designed diagnostics system based on the selected suitable diagnostics methods and other appropriate process monitors the status of these technical equipments.