This master´s thesis deals with the design of the control circuits for digital potentiometers and their application in analog systems. Digital potentiometers are three-terminal resistors with an adjustable center connection. The digital potentiomneters enable to drive logic gates, LED drivers, LCD drivers, analog switches etc. Controlling of these mentioned devices is possible by the I2C 2- wire serial bus (invented by Philips). The digital potentiometers are used to control of the primary parameters like cut-off frequency and quality factor in the state variable filter and cut-off frequency in a passive filter. Both filters are simulated in PSpice and then compared with the measured results. Next parts of this master's thesis are a computer program and a exemplary protocol.

This thesis deals with development of tool – macros which help to create coaxial cavity filters. It describes problematic design of complex structures at CST Studio Suite 2009. For this purpose macros supporting coarse and fine model to method Tuning – Space Mapping (TSM) was made. This means creating fine model at CST MWS and coarse model at CST DS.

This master's thesis is interested in concept of frequency converter for induction machine to power 2 kW. Control of this converter is wirelessly or via PC. The solution is based on execution with integrated circuits and microprocesors to control them.

The aim of my master’s thesis was to create models of the damping device and observing their behavior in interaction with the structure. First was the construction separately modeled with Java application named FyDiK2D like a model with one degree of freedom. Model of construction takes form like a high, thin rod with full circular cross section. The lower part was restrained into the subsoil. The design was to verify the correct functionality of the model by comparing the analytical and numerical solutions. For capturing the precise behavior of the structure was converted to a multi-stage model. Then the pendulum damper was applied on this construction and found amplitude lies in highest point of multi-stage model. He was then replaced by tuned mass damper. By comparing these amplitudes from both dampers was found which kind of damper is efficient for multi-stage model.

This graduation thesis deals with evaluation of power and coolant flow in reactor core. The first part is a description of nuclear power plant VVER 440. It is focused on parts important for transfer and utilize energy in regular operating of generating block. In the second part, the equations for calculation of power and coolant flow in reactor core are deduced. The last part is about designing the program for calculation of published values. There are specified requirements for the program and on the basis of this the source code is written. The parts of code are described. In conclusion of this part, the user's manual is work out. The program is on CD in the annexe.

Theme of this master’s thesis is design of software support for business intelligence. Design is realized in cooperation with corporation ZZN Pelhřimov a.s. Introduction is focused on theoretical description of business intelligence and datamining and also on development environment in which is project designed. Corporation is characterised also in introduction. Main part contains data collecting and definition of individual modules. In conclusion of this thesis will be several types of analysis from collected data and then according to these analysis, we can draw measures to improve current state of corporation.

The task of the diploma thesis named VBA and Maple Application on Process Engineering Problems is to show the possibilities of using these programming languages for various engineering tasks. Particularly the programming language Visual Basic for Application (VBA), which is a part of MS Office package, is very little used in practise. That´s why this thesis solves the complex task of a furnaces design process; the topic was reccomended by the supervisor prof. Ing. Josef Kohoutek, CSc. Specifically, the thesis deals with calculations of heat transfer and optimization of the height of extended surfaces of tubes in the convection section of process furnaces. The entire task is elaborated in VBA and runs in Excel. After entering the input information, the created program first calculates the size and heat output of the convection section, but it can also optimize the height of extended surfaces in different parts of the convection section and thus minimize investment costs.

No description available.