No description available.

No description available.

<p>Case hardening distortions are a major problem for gear manufacturers. The aim of the current work is to create a simulation model, able to predict how and when case hardening distortions arise. The results presented in this thesis form a basis for such a model.</p><p>Two case hardening steels, with base carbon contents of 0.20 and 0.21 % C were studied using dilatometer experiments. One of them was carburized to 0.36, 0.52 and 0.65 % C in order to investigate the influence of carbon content. Experiments were performed during both isothermal and continuous heating and cooling conditions. The results were used to evaluate phase transformations, heat expansion behaviors and phase transformation strains. The expansion behavior of the material was modeled as a function of temperature, carbon content and phase fractions. The phase transformations to martensite and bainite were modeled, using the Koistinen-Marburger equation and a transformation rate equation based on Austin-Rickett kinetics, respectively. Experiments were simulated using the COMSOL Multiphysics software, to verify the model with respect to martensite and bainite transformations, heat expansion behavior and phase transformation strains.</p>

The main objective of this study was to investigate if natural honey can be used as a cryoprotecting agent (CP) in vitrification medium to improve the viability of vitrified-warmed bovine oocytes. The first study was conducted to investigate the dehydration capability of natural honey compared with sucrose, and to determine the proper concentration of honey-based medium and the optimum time for sufficiently safe dehydration of bovine oocytes. Matured cumulus-oocyte complexs (COCs) were denuded and introduced individually into different concentrations (0.25, 0.5, 1.0, 1.5 or 2.0 M) of honey and sucrose-based medium followed by rehydration in control media (TCM). Video images were recorded during dehydration and rehydration, and oocyte images were captured at 12 time intervals to calculate oocyte-volume changes during dehydration and rehydration. Results demonstrated that, in honey-based media, the maximum oocyte shrinkage was achieved after 60 sec exposure in 0.25M, 0.5M and 1.0M concentrations; while at higher concentrations 1.5M and 2.0M, the maximum dehydration occurred at 30 and 20 seconds respectively. In sucrose-based medium, the maximum oocyte shrinkage was achieved after 60 sec exposure in 0.25 or 0.5M concentrations. However, at higher concentrations (1M, 1.5M or 2M), the maximum dehydration occurred at 30, 20 and 10 sec. For rehydration, oocytes dehydrated in honey or sucrose-based medium were able to regain their original volume within 60-120 sec. However, oocytes dehydrated in higher concentrations (2M honey, and 1.5M and 2M sucrose) were rehydrated back to their original volume within 20 sec. This study concluded that natural honey and sucrose caused similar cell dehydration. Only oocytes dehydrated in 1M honey-based media reached maximal dehydration after 60 sec and equally regained original volume. Therefore, 1M of honey-based medium is suggested for sufficient and safe oocyte dehydration during vitrification. The second study was conducted to determine in vitro maturation (IVM), in vitro fertilization (IVF) and embryonic development of bovine oocytes vitrified in honey-based vitrifcation media. In Experiment 1, bovine COCs were randomly distributed in control group (non-vitrified; G1), 0.5M sucrose group (second control; G2), and 0.5M, 1M and 1.5M honey groups (G3, G4 and G5 respectively). The COCs were exposed to equilibration solution 1 (VS1) at ~ 22 oC for 5 min and to vitrification solution 2 (VS2) for 1 min, mounted on Cryotops and plunged into LN2. COCs were warmed in TCM and honey/sucrose medium at 38.5oC for 1 min, washed, matured in vitro (IVM), denuded, and immunostained to evaluate maturation. Maturation rate was significantly higher (80.7%) in control group (G1) than in vitrified groups (56, 52, 55 and 51% in G2, G3, G4 and G5, respectively) (P<.0001), whereas there was no significant difference among the vitrified groups (P>0.05). In Experiment 2, bovine COCs distributed in control (not vitrified, G1) and vitrified groups using 1M honey and 0.5M sucrose (G2 and G3 respectively), underwent for IVM, IVF and in vitro culture (IVC) for 9 days. Cleavage rate was significantly higher (P<.0001) in the control group (74%, G1, n=183) than rates of vitrified groups (51% in G2, n=137; and 42% in G3, n=131), whereas no differences among vitrified groups (P=0.0723). Rate of blastocyst formation was significantly higher (34%) in G1 than in the vitrified groups (P<.0001); however, blastocyst formation rates in the honey group were significantly higher (P=0.0026) than in the sucrose group (13% and 3% respectively). Addition of natural honey (1.0M; or 21.7%w/v) in vitrification medium can safely and sufficiently dehydrate bovine oocytes during vitrification procedure. The vitrification of bovine oocytes in 1M honey improved their post-warming maturation abtility and embryonic development.

Case hardening distortions are a major problem for gear manufacturers. The aim of the current work is to create a simulation model, able to predict how and when case hardening distortions arise. The results presented in this thesis form a basis for such a model. Two case hardening steels, with base carbon contents of 0.20 and 0.21 % C were studied using dilatometer experiments. One of them was carburized to 0.36, 0.52 and 0.65 % C in order to investigate the influence of carbon content. Experiments were performed during both isothermal and continuous heating and cooling conditions. The results were used to evaluate phase transformations, heat expansion behaviors and phase transformation strains. The expansion behavior of the material was modeled as a function of temperature, carbon content and phase fractions. The phase transformations to martensite and bainite were modeled, using the Koistinen-Marburger equation and a transformation rate equation based on Austin-Rickett kinetics, respectively. Experiments were simulated using the COMSOL Multiphysics software, to verify the model with respect to martensite and bainite transformations, heat expansion behavior and phase transformation strains.

The thesis evaluates the influence of the addition of polypropylene fibers on the properties of concrete. One of the major elements is to compare different finishes polypropylene fibers without static functions, including low temperature plasma treatment plasma. The main work is to test the knowledge of the properties of fresh concrete with these fibers, as well as testing volume changes and finally testing these concretes on physical and mechanical properties

In theory, this work is devoted to the principles and methods of measurement of volume changes of mortars and concretes. Emphasis is placed on cement self-levelling screeds with initial shrinkage compensation. In the practical part of the work is devoted to the development of prototype measuring system designed for non-contact detection of volume changes hydrating silicate. Using the new measurement method is also practically examined the influence of boundary conditions on hydration volume changes of selected silicate binders, cement mortar and cement levelling compound based on four different connective concepts. In the calculation, this work focuses on the numerical modelling of volume changes of the examined compounds.

Bone grafts and titanium implants are commonly used for surgical/prosthetic rehabilitation of the atrophic edentulous maxilla. The factors which influence bone graft healing and implant integration are not sufficiently understood. The aim of this dissertation was to evaluate autogenous bone grafting and delayed placement of titanium endosteal implants for reconstruction of the atrophic maxilla, including the effects of different patient factors on bone graft healing and integration of titanium implants into grafted bone. A total of 46 patients with severe maxillary atrophy received onlay- (n=35) or interpositional bone grafts (n=11) and 6 mo. later received 341 titanium endosteal implants. All bone grafts were harvested from the iliac crest. All patients received fixed dental bridges and were followed clinically and with radiographical examinations for 3 yr. In Papers I and II, a total of 68 titanium microimplants were placed and retrieved from the bone grafts at various time points for histological analysis of the bone graft-implant interface. Integration was better after 6 mo. healing than placement in conjunction with bone grafting. Implant integration was similar for the two bone-grafting techniques. In Papers III and IV, originally including 29 patients and 222 implants, implant stability was measured with resonance frequency analysis (RFA) at placement, abutment connection, after 6 mo. of loading (III) and after 3 yr. of loading (IV). Ten non-grafted patients measured at the same time points were used as controls (III). RFA showed equal implant stability in grafted bone vs. non-grafted bone (III). Stability did not change from the 6-mo. to the 3-yr. control. Cumulative survival was 90% after 3 yr. (21 implants failed). Thirteen implants were lost prior to loading and 8 during functional loading. The group of failed implants showed a lower primary RFA stability than those that remained stable for 3 yr. All patients received and maintained a fixed dental bridge throughout the study. In Paper V, the graft volume changes (GVC) during the 6-mo. healing period prior to implant placement were studied in 30 patients using computerized tomography. Blood samples were taken from 25 patients in conjunction with bone grafting and were analysed for 13 haematological factors. Bone mineral density (BMD) was measured in 21 patients. Biopsies of the bone grafts were analysed for bone volume fraction (BVF). GVC (loss) was correlated with decreased BMD of the lumbar vertebrae L2-L4. There was no correlation between the haematological factors and GVC. Implant failure was not correlated with BMD, BVF or GVC. This dissertation shows that surgical/prosthetic rehabilitation of the atrophic edentulous maxilla with autogenous iliac crest bone grafts and delayed placement of titanium implants after 6 mo. of graft healing is effective, reproducible and functional. RFA at placement may be able to predict later implant failure.

The thesis deals with the study of magnesium oxide burned by various burning regimes and his possibilities of its usage as potential expansion additive. The theoretical part of the thesis concerns mainly the volume changes and how they can be influenced. The practical part focuses on monitoring morphology, phase composition and the hydration process of magnesium oxide.

The master´s thesis deals with the volume changes of concrete during its concrete glow. These volume changes are generally more susceptible to high-strength concretes – HSC, which contain a bigger dose of binder. The theoretical section describes the possible reduction volume change especially in HSC, which are focused on the composition of concrete, especially on the type and particle size distribution of aggregate. Then attention is also paid to the different types of cements and their possible substitution. The part of the theoretical work describes the types of volume changes that may occur. In the experimental part are suggested the HSC by to secure informations. Different kinds of aggregates are used and a continuous or discontinuous grain curve and a different maximum grain size. Part of the sample was made only from CEM I 42,5 R and the second part of the sample from CEM I 42,5 R with the addition of very finely ground limestone. In terms of the part of the work were monitored volume changes of concrete with different composition and also their mechanical properties after 7, 28 and 90 days. Specifically, compressive strength, tensile strength, strength of the surface layers of concrete, water absorption and water-permeability test concrete. In conclusion, are listed all the results of tests.