No description available.

This thesis focuses on identifying acoustic noise generating components in piezoelectric blowers through transverse velocity measurements and the development of a numerical fluid model. Piezoelectric ceramics have proven useful for many industries and areas of research involving: high precision actuators, noise control, ultrasonic devices, and many other areas. As of late, a unique adaptation of piezoelectric ceramics is surfacing in the area of pumping and cooling. Air pumps that use these ceramics replace the traditional electric motor, resulting in lower power consumption, less moving parts, constant pressure gradients, lower overall weight, and a low profile. The current drawback of this application is the acoustic radiation produced by the blowers. Since these blowers are new to market, little research or development has been done to characterize the noise emissions. This thesis studies the acoustic emissions from the front face of a Murata piezoelectric blower. Jet noise and structural vibrations are two acoustic sources of interest that are studied in this research. A Direct Numerical Simulation (DNS) of the fluid flow through a Murata blower is developed to better identify noise generating mechanisms. The model solutions predict trends in sound pressure levels (SPL) of the jet noise and volumetric flow rates. Both the SPL and flow rate are shown to be functions of critical geometrical dimensions within the flow path of a Murata blower. Important dimensional components are identified as well as non-influential ones. Design guidelines are given to reduce noise emission from the front side of a blower and increase the volumetric flow rate. The results of this research have a direct impact on the piezoelectric blower industry and future blower designs.