Project documentation of residential building construction solves brickfull apartment building with four floors and one underground floor with technical storey with garage for 12 cars. There are 11 housing units for housing. In this project the emphasis is layed on the layout space arrangement in a compliance with consideration and assessment of stability of load bering structure, fire safety of the building, noise protection and energy saving demands. The construction will be implement on a plot č.649/20 registered in cadastral in Zdar nad Sazavou.

This thesis describes the design of a multifunctional three-storey house. The proposal includes the choice of the structural system, the choice of walls, windows, designing footings, staircases, numerous parking areas, flat roof drainage, management of rainwater. The specialized section is designed ventilating buildings with VRF systems heating / cooling with heat pumping. A check is a calculation of bearing capacity of ceiling construction.

The main topic of this diploma thesis was to design project documentation of sporty and relaxation house in the city of Vracov The designed object is located in western part of the town Vracov. The surrouding terrain is flat. I tis designed as three interconnected parts with rectangular shape and flat roof with a slope of 3 %. The subject of this thesis is to design project documentation recreation and relaxation center with guest house in Vracov. Material of the building is a ceramic brick system in a combination with reinforced concrete. Outer walls are made of heat-insulating ceramic brics Heluz Family 2v1 with polystyrene foam inside their cavities. The entrance is situated in the middle part, where reception is located that is directing the clients further into the latter parts of the building. The middle and western parts have two storeys and are made for the sporting activities. The eastern part is a two storey building, where the first floor is designed as a part for relaxation. Second and third floor are designed as a hotel part. Apart form a project documentation, there is an architectonical study of the building and an airconditiong design specialization.

The goal of this Diploma Thesis was the detection of the potential trends of manufactural and business activities in manufactural division AZ KLIMA, Ltd and to suggest the appropriate measures .The starting situation of this company is described in an extensive analytical part. The output is a summary of its strenghts and weakness aspects, opportunities and threats. The suggest of strategy is presented by an extended marketing mix. The emphasis is placed first of all on product sphere. There are mentioned technological and organisational impacts of commencement of production of bolting and welding ducts, spiral tubes and ending distribution elements. Afterwards there are suggested methods of economy in manufactural process, market targeting and personal impacts. At the end there are outlined the time-dependent implementation harmonogram of suggested strategy, feasibility control and evaluation of expected benefits.

The main goal of this thesis is an introducing and guiding the reader with all important aspects of a proposal of ventilation system for cytostatics laboratory, from theoretical knowledge about the issue via familiarization with an appropriate legislative statute, a demonstration of relevant calculations needed for the project, a proposal in the form of technical reports as well. In this thesis the process of validation, which is needed for installed technology in the cleanroom, is also described. The thesis is supported by drawing documentation of real ventilation project for cytostatics laboratory, which follows the aforementioned technical report and calculations.

The subject of this thesis is the construction and maintenance of project documentation for the implementation of the multipurpose building in Jihlava. Designed building is located in the southern town of Jihlava, in the slightly hilly terrain on the west side. The house is rectangular ground plan, with a projecting portion bowling lanes. Roofing form a single-slope roof. It is a multifunctional building, the first floor consists of a restaurant with bowling lanes in the second and third floor houses the Tax Office. They used conventional and traditional building materials. The thesis also specializing on the subject of air conditioning and heating.

The aim of the thesis is the proposal and the preparation of project documentation for the construction of passive residential building on a plot number 1691/96 cadastral area of Černovice in a Brno city. The residential building will be built in a sloping terrain. It is a five-storey residential building with one floor below ground. The house has 16 residential units and is designed for a maximum of 40 people. Two of the units are designed as a wheelchair accessible. The skeletal staircase of a building is located outside the main building. The residential units are connected by porch. The porch is built from a steel skeleton and is standing outside the main building. At the south side of building is free standing steel construction used as balcony for residential units. Perimeter wall is made of sand-lime blocks which are insulated by graphite expanded polystyrene. Perimeter wall of basement is made of permanent formwork filled with concrete. The wall is also insulated with extruded polystyrene. The ceilings are made of prestressed concrete panels Spiroll. The supporting roof structure is made of wood trusses. The roof is pitched and the roof deck is designed vegetational. The building is ventilated using forced air handling unit. Heating and hot water is provided sources: pellet boiler and photothermic panels. The apartment house is designed with regard to energy saving as passive. Emphasis is placed on a compact building envelope, simplicity of shape, air tightness, low heat loss and high solar gain arising due the building orientation to the cardinal directions.

The thesis theme is a carpentry production facility with the adjacent office building at Slané. The thesis deals about the proposal of the object with building and construction solutions of the building. The thesis includes a detialed solution of the exhaustion ventilation the technology part of the carpentry. In the office building there is a reception in the 1st floor and the exhibition spaces. The vertical communication in the building is solved by two-arm straight starcases, one in office building and the second in the annexe hall for the employes. The construction system of the hall is reinforced concrete prefabricated system with advanced prestressed girders. Office building is designed like a reinforced concrete monolithic frame. Buildings are divided by dilatation. The object is based on the footings which are connected to base thresholds. The rooftops of the objects are flat.

The aim of diploma’s thesis is a design od school house, exactly language school and english kindergarten. It’s a new building, designed on a flat plot no.873/21 in cadastre unit Horni Herspice, in a Brno’suburb. The language school is intended to accommodate 41 students. Kindergarten is for education preschool children. Kindergarten is designed for total capacity of 40 children. The building was designed in a rectangular shape without cellar. It is a two-storey masonry system. Both parts of the building were designed so that students and children do not meet. A schoolmaster office is located on the second floor. The building was designed from sand-lime bricks KM Beta. The thermal insulation is made from external thermal insulation composite systems ETICS, floor structure is from ceramic-concrete precast floor slabs. The major part of the flat roof structure is double-layered while the rest is a green single-layer construction.

The aim of my thesis is to design the project documentation of an energy-efficient house for doctors and nurses, located near the hospital in Kroměříž. The work is divided into three parts. The first part focuses on the architectural and construction design of the building. The second part deals with the design of the technical equipment of the building and its layout. The third part deals with the design and comparison of different cooling sources. The building is a two-storey building with a flat, vegetated roof and its design is in the building permit stage. On the ground floor there is a bistro, a dining room with food preparation, technical rooms and 3 apartments. On the second floor there are 9 apartments and a lounge. In the middle of the building there is a circulation area with a staircase, a glass elevator and a large skylight that illuminates the whole area. Heating is provided by a gas condensing boiler. Ventilation is provided by three air handling units. A hybrid cooling system with heat recuperation from the refrigerant is designed. For partial electricity demand, 62 photovoltaic panels are installed on the roof of the building. The third part deals with the design of alternative cooling solutions for the building. Multi split, VRV and water cooling system with roof top chiller are proposed in addition to the already designed hybrid system. These four alternatives are compared with each other and the most suitable option is then designed.