The subject of this master’s thesis is a project documentation for development of a nursery school. The nursery school is situated on the outskirts of the city Příbor. The school is designed as a two-storey building and includes 4 classrooms, with total capacity reaching 60 pupils. The perimeter wall consists of Porotherm clay block walling system. The ceiling framework uses a combination of two systems; the prestress hollow core slabs Spiroll and reinforced concrete monolithic blocks. The roof is designed as a single skin cladding with a flat, green roof. The external thermal insulation composite system (Etics) is proposed for the insulation of the building. The outer walls are partially cladded with timber. Additionally, the combination of white rendering and timber cladding will form a modern looking building that fits within a new housing development. Furthermore, the plan includes an outside playground, with allotments and parking spaces on the premises for the use of a nursery school.

The topic of the Diploma thesis is a design of the New train station in Brno. The plot is located on the boundary of three city districts – Komárov, Štýřice and Trnitá. This area includes the railway structure for the new train station and also its public spaces, which are very close to the river Svratka. The railway structure is designed as bridge construction, that rises all platforms and rail tracks to 7,65 metres above the ground level. So all of the railways do not become a barrier in the city. The main concept extends a longitudinal axis of the city boulevard through the train station, which creates a high-rise building in the southern part of the plot. This axis is written not only to the layout but also to the roof design. The train station includes two underground levels, ground floor and first floor. Underground levels consist of P+R parking, deliveries only area, technical facilities and subway terminal. The ground floor is the main traffic centre. There is an entrance hall, shopping area, bus terminal and public corridors. The first floor includes platforms for train departures and arrivals. There are also public spaces in the entrance hall. The basic structural system consists of two parts. The first part is a massive reinforced concrete structure of the railway bridge deck and all underground levels. This structure is based on reinforced concrete foundation pads with drilled piles. The second part is a steel frame structure of the roof. That includes steel columns and truss girders for the structure of the lower area. The higher part of the roof is designed as a steel-truss bridge with the characteristic profile. The new train station supposes to create a new gate to the city of Brno, that connects contemporary districts with the historical city center.

The thesis dealt with the reconstruction of the existing farm buildings. After a complete reconstruction of the object it will serve as a guest house with training center. The equipment includes the restaurant with its own kitchen facilities and building will be completed by the wellness center, which will be located in the new part of development. Object of wellness center will probably be completely resolved in the construction phase B. The property is located in the village Býkovice, Býkovice (616524 ), house No. 30, No. 82, land parcel numbers: 120/1 , 120/2 , 121/1. That object will consist of three floors, one floor is partly underground, further aboveground floor which will be directly accessible from the northern part and attic. The total built-up area will be approximately 526 m. Ridge height is 5,250 m and 3,840 m. The building is based on the existing foundations and the new wellness center is based on the footings of plain concrete C16/20. The base concrete slabs will be made new in the entire building, reinforced with KARI networks 150x150x6. Peripheral bearing and interior bearing walls remain largely preserved (masonry, brick, stone and mixed). New structures will be designed in Porotherm and added with light rails Fermacell (SDK). The steel-concrete ceiling and ceiling in the new part will be made of Porotherm. The staircase is made of steel, staircase. The roof is gabled house (main building) and desk (east wing), above the training center is also gabled roof. All roofs are fitted with metal roofing.

The master´s thesis deals with a project documentation of a office building with fitness center in Brno-Bystrc. The object is designed as a detached building with four floors and with one basement. Floor plan of the building is regular, staffed by sloping terrain. In basement is situated underground garage and technical rooms of building. In the first floor is fitness center and garage for a customers. In other floors are office spaces for private company. Above the roof is a engine rooms of ventilation. The structural system is reinforced concrete skeleton, facade is designed as a curtain walling. The object is covered with a flat roof.

Master´s thesis ,,WELLNESS centre in Slavkov u Brna" is processed in the from of project documentation. The building is a partially basement, it has three floors and an attic, roofed in sellar rooftop and partially counter rooftop. The house is designed to plot No. 1787/1, 1787/30 in Slavkov u Brna Slovanská street. Built up area is 554,7 square meters. The basement, ground floor and second floor belongs to a wellness and a guesthouse. The third floor is used for housing owners. The building is based on the footings of plain concrete foundation slab drag over the basics with reinforcing karisítí . Walling system and ceilings from Porotherm , partitions from the system Knauf. The building is connected to the local road and the available utilities.

The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

The subject of the diploma thesis is a project documentation of a multifunctional building within the scope of the implementing documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The multifunctional building has one underground floor and nine above-ground floors. In the basement there are technical facilities of the building and a parking area, in the 1st floor there are business premises, in one part of the 2nd floor there is a gym and the remaining areas are used for administrative purposes as well as the entire 3rd to 9th floor. The construction system is designed as a reinforced concrete monolithic skeleton, completed by a reinforced concrete core. Ceiling structures are monolithic reinforced concrete locally supported slabs. The building is founded on the concrete slab placed on drilled shafts. The main element of the outer wall is curtain walling, which is made from a mullion-transom system.

This master’s thesis deals with construction of the gross building of new building of learning complex FEKT VUT in Brno. It contains the design of earthworks, underground setting piles, monolithic structures and isolation of the building for further construction. Construction and technological project includes technical report, time and financial plan of construction, study of the implementation of major technological stages of site preparation, budget of facilities, technological regulation to solved stages, inspection and test plan of monolithic structures, health and safety plan and energy label of objects.

The aim of the master thesis is a technological solution of structure for Police of Czech republic. The main aim of the thesis is the support construction and the ceiling contruction. The thesis also includes a site layout with broader relations to traffic routes, budget for the technological procedure, technical report, technical report for site equipment, technological directive for the construction of ceiling and ground works, Inspection and check plan, time schedule, concept of machinery setup and safety and protection of health during work

Subject of this work is pursuance technology of above-standard family house. This diploma thesis contains construction and technology report, technological prescriptions for important parts of buildings, technology report of plant building site, concepts of mechanical assembly, inspection and test plan, technology report of health and safety on the construction site. Budget, calculation and time planning, a drawing of the facilities of the construction site, description of transport relations is included in addendum. Work also contains part about use of Calcium silicate masonry and its comparation.