1 |
ON THE RATE-COST TRADEOFF OF GAUSSIAN LINEAR CONTROL SYSTEMS WITH RANDOM COMMUNICATION DELAYJia Zhang (13176651) 01 August 2022 (has links)
<p> </p>
<p>This thesis studies networked Gaussian linear control systems with random delays. Networked control systems is a popular topic these years because of their versatile applications in daily life, such as smart grid and unmanned vehicles. With the development of these systems, researchers have explored this area in two directions. The first one is to derive the inherent rate-cost relationship in the systems, that is the minimal transmission rate needed to achieve an arbitrarily given stability requirement. The other one is to design achievability schemes, which aim at using as less as transmission rate to achieve an arbitrarily given stability requirement. In this thesis, we explore both directions. We assume the sensor-to-controller channels experience independently and identically distributed random delays of bounded support. Our work separates into two parts. In the first part, we consider networked systems with only one sensor. We focus on deriving a lower bound, R_{LB}(D), of the rate-cost tradeoff with the cost function to be E{| <strong>x^</strong>T<strong>x </strong>|} ≤ D, where <strong>x </strong>refers to the state to be controlled. We also propose an achievability scheme as an upper bound, R_{UB}(D), of the optimal rate-cost tradeoff. The scheme uses lattice quantization, entropy encoder, and certainty-equivalence controller. It achieves a good performance that roughly requires 2 bits per time slot more than R_{LB}(D) to achieve the same stability level. We also generalize the cost function to be of both the state and the control actions. For the joint state-and-control cost, we propose the minimal cost a system can achieve. The second part focuses on to the covariance-based fusion scheme design for systems with multiple > 1 sensors. We notice that in the multi-sensor scenario, the outdated arrivals at the controller, which many existing fusion schemes often discard, carry additional information. Therefore, we design an implementable fusion scheme (CQE) which is the MMSE estimator using both the freshest and outdated information at the controller. Our experiment demonstrates that CQE out-performances the MMSE estimator using the freshest information (LQE) exclusively by achieving a 15% smaller average L2 norm using the same transmission rate. As a benchmark, we also derive the minimal achievable L2 norm, Dmin, for the multi-sensor systems. The simulation shows that CQE approaches Dmin significantly better than LQE. </p>
|
2 |
Channel Probing for an Indoor Wireless Communications ChannelHunter, Brandon 13 March 2003 (has links) (PDF)
The statistics of the amplitude, time and angle of arrival of multipaths in an indoor environment are all necessary components of multipath models used to simulate the performance of spatial diversity in receive antenna configurations. The model presented by Saleh and Valenzuela, was added to by Spencer et. al., and included all three of these parameters for a 7 GHz channel. A system was built to measure these multipath parameters at 2.4 GHz for multiple locations in an indoor environment. Another system was built to measure the angle of transmission for a 6 GHz channel. The addition of this parameter allows spatial diversity at the transmitter along with the receiver to be simulated. The process of going from raw measurement data to discrete arrivals and then to clustered arrivals is analyzed. Many possible errors associated with discrete arrival processing are discussed along with possible solutions. Four clustering methods are compared and their relative strengths and weaknesses are pointed out. The effects that errors in the clustering process have on parameter estimation and model performance are also simulated.
|
Page generated in 0.0957 seconds