Numerous studies have identified the west coast of Canada as an attractive place for the development of wave energy projects. To evaluate the viability of these projects, an accurate description of the wave resource is crucial. Most of the previous efforts to characterize the wave climate in B.C. at shallower waters, where wave energy converters (WECs) are most likely to be deployed, lack the necessary nearshore spatial resolution, and were driven by overly simplistic wave boundary conditions. In addition, none of the previous studies have included the effect of tidal currents, which have been proven to be significant in wave resource characterizations in other locations. This work increased the fidelity of the wave resource characterization and developed an understanding of the impact of tidal currents on the wave conditions in this region by generating two most accurate, long-term (14 years, 2004 to 2017), high resolution (in space and time) datasets of the wave resource for the west coast of Canada. The two datasets were generated using nearly identical SWAN wave models, which their only difference was that one of them (V5), did not incorporate the effect of currents, while the other (V6) included tidal currents as forcing. Thus, the pure influence of the tidal currents on the wave characteristics was able to be identified when comparing the two wave model results. This study developed simple, robust, and objective metrics to support the calibration process and to evaluate the performance of the models. Utilizing these metrics, the V5 and V6 models presented substantial improvements in reproducing the wave conditions of about 18% and 20%, respectively and in relation to the previous most complete and accurate wave model of the region (V4). Their better performance was largely achieved by a significant increment in their ability to reproduce the significant wave height (H_m0) and energy period (T_e). The inclusion of tidal currents in the wave model increased the accuracy of the wave resource characterization, mainly by improving the model’s ability in simulating T_e by 5.1%. The most sensitive wave parameter to the tidal currents was the peakedness of the wave spectrum (Q_p), which was consistently and significantly reduced by values even larger than 2.5. In some regions, directions characterized by the mean wave direction (D_m) and the directional spreading (D_spr) were also noticeably very sensitive to the currents, which even deflected D_m to its opposite direction and drove changes in D_spr that reached values of up to 40°. However, these significant transformations were less frequent and reduced in magnitude at exposed (to swell-waves) sites, where strong currents have affected waves in a reduced part of their trajectory. Typically, tidal currents had the effect of reducing the wave power density (P), but in a relatively small amount, however, during rare events, tidal currents were able to induce changes in this parameter ranging -140 kW/m to 75 kW/m. At these extreme events, it was observed that the peak of the wave spectra became flatter, with some of its wave height variance redistributed to near increasing and decreasing frequencies and directions, regardless to the magnitude and direction of the local tidal currents. Impacts of the tidal currents on P were largely attributed to the induced changes in H_m0 and T_e. Although D_spr and Q_p were greatly transformed by the action the tidal currents, they account very little in explaining the variations in P. These four wave parameters together, and how they are transformed under the presence of currents, can explain a large part of the changes in P, however, other transformations of the wave spectrum due to the currents, not investigated in this study, must account for a considerable part of the changes in P. / Graduate