Surface plasmons are bound TM polarized electromagnetic waves that propagate along the interface of two materials with real dielectric constants of opposite signs. Surface plasmon resonance (SPR) sensors make use of the surface plasmon waves to detect refractive index changes occurring near this interface. For sensing purposes, this interface typically consists of a metal layer, usually gold or silver, and a liquid dielectric. SPR sensors usually measure the shift in resonance wavelength or resonance angle due to index changes adjacent to the metal layer. However this restricts the limit of detection (LOD), as the regions of low slope (intensity vs. wavelength or angle) in the SPR curve contain little information about the resonance. This work presents the technique of tunable laser interrogation of SPR sensors. A semiconductor laser with a typical lasing wavelength of 650nm was used. A 45nm gold layer sputtered on a BK7 glass substrate served as the sensor. The laser wavelength is tuned to always operate in the region of highest slope by using a custom-designed LabVIEW program. It is shown that the sensitivity is maximized and LOD is minimized by operating around the region of high slope on the SPR curve.

Silicon photonics is a very promising technology for future low-cost high-bandwidth optical telecommunication applications down to the chip level. This is due to the high degree of integration, high optical bandwidth and large speed coupled with the development of a wide range of integrated optical functions. Silicon-based microring resonators are a key building block that can be used to realize many optical functions such as switching, multiplexing, demultiplaxing and detection of optical wave. The ability to tune the resonances of the microring resonators is highly desirable in many of their applications. In this work, the study and application of a thermally wavelength-tunable photonic switch based on silicon microring resonator is presented. Devices with 10µm diameter were systematically studied and used in the design. Its resonance wavelength was tuned by thermally induced refractive index change using a designed local micro-heater. While thermo-optic tuning has moderate speed compared with electro-optic and all-optic tuning, with silicon’s high thermo-optic coefficient, a much wider wavelength tunable range can be realized. The device design was verified and optimized by optical and thermal simulations. The fabrication and characterization of the device was also implemented. The microring resonator has a measured FSR of ~18 nm, FWHM in the range 0.1-0.2 nm and Q around 10,000. A wide tunable range (>6.4 nm) was achieved with the switch, which enables dense wavelength division multiplexing (DWDM) with a channel space of 0.2nm. The time response of the switch was tested on the order of 10 us with a low power consumption of ~11.9mW/nm. The measured results are in agreement with the simulations. Important applications using the tunable photonic switch were demonstrated in this work. 1×4 and 4×4 reconfigurable photonic switch were implemented by using multiple switches with a common bus waveguide. The results suggest the feasibility of on-chip DWDM for the development of large-scale integrated photonics. Using the tunable switch for output wavelength control, a fiber laser was demonstrated with Erbium-doped fiber amplifier as the gain media. For the first time, this approach integrated on-chip silicon photonic wavelength control.

Wavelength-tunable optical response from solid-state optoelectronic devices is a desired feature for a variety of applications such as spectroscopy, laser emission tuning, and telecommunications. Nonlinear optical response, on the other hand, has an important role in modern photonic functionalities, including efficient frequency conversions, all-optical signal processing, and ultrafast switching. This study presents the development of optical devices with wavelength tunable or nonlinear optical functionality based on plasmonic effects. For the first part of this study, widely wavelength tunable optical bandpass filters based on the unique properties of long-range surface plasmon polaritons (LR SPP) are presented. Planar metal stripe waveguides surrounded by two different cladding layers that have dissimilar refractive index dispersions were used to develop a wide wavelength tuning. The concept was demonstrated using a set of index-matching fluids and over 200nm of wavelength tuning was achieved with only 0.004 of index variation. For practical application of the proposed concept, a thermo-optic polymer was used to develop a widely tunable thermo-optic bandpass filter and over 220 nm of wavelength tuning was achieved with only 8 ºC of temperature variation. Another novel approach to produce a widely wavelength tunable optical response for free-space optical applications involves integrating plasmonic metasurfaces with quantum-electronic engineered semiconductor layers for giant electro-optic effect, which is proposed and experimentally demonstrated in the second part of this study. Coupling of surface plasmon modes formed by plasmonic nanoresonators with Stark tunable intersubband transitions in multi-quantum well structures induced by applying bias voltages through the semiconductor layer was used to develop tunable spectral responses in the mid-infrared range. Experimentally, over 310 nm of spectral peak tuning around 7 μm of wavelength with 10 ns response time was achieved. As the final part of this study, highly nonlinear metasurfaces based on coupling of electromagnetically engineered plasmonic nanoresonators with quantum-engineered intersubband nonlinearities are proposed and experimentally demonstrated. In the proof-of-concept demonstration, an effective nonlinear susceptibility over 50 nm/V was measured and, after further optimization, over 480 nm/V was measured for second harmonic generation under normal incidence. The proposed concept shows that it is possible to engineer virtually any element of the nonlinear susceptibility tensor of the nonlinear metasurface. / text