Abstract Fishways are hydraulic structures designed to dissipate the energy of flowing water in order to decrease water velocities and increase water depths. The history of fishways is long, the first written remarks date back to the 17th century. Fishway hydraulics, however, have been intensively studied only starting since the 1980's. Fishways have been classified into three main categories according to their hydraulic characteristics: pool-and-weir, vertical slot, and Denil fishways. Fishways are hydraulically complex structures, and thus designing tools for different fishway types have been developed. In this report, a new designing procedure has been established, and equations for each main fishway type have been suggested. In addition, flow conditions below different fishway types have been examined, and velocity distributions at weirs with V-shaped crests in both pool-and-weir fishways and at a single weir have been compared in different discharges and drops. Fishway flows have been compared with flows over single weirs.

It is suitable to add practical illustrations of hydraulic tasks during teaching hydraulics and hydrology. These practical illustrations can be realized by mobile hydraulic circuit which is situated in the auditorium. This thesis is focused on constructional and project solution of the circuit which consists of a compensatory tank with sufficient capacity, pump aggregate and hydraulic measure flume. The construction of hydraulic flume must enable quick, simple and safety installation of a scaled down models of a hydro technical structures. The main requirements of a mobile teaching circuit are clearness of practical hydraulic illustrations, compact dimensions, comparatively low weight, mobility and simple control and manipulation. This diploma thesis also includes design of a scaled down models of a hydro technical structures, especially set of plate weirs, bed-crested weir, ogee-crested weir, culvert, Venturi flume, sluice and radial gate, pier and roughened bed. The hydraulic circuit drawing part also includes instrument carrier with level gauge. This diploma thesis includes theoretical text part, technical report of designed objects, hydraulic calculations and drawing part.