The thesis deals with the design and review of the supporting structure of the exhibition pavilion in the suburb of Brno. The design is shaped dome built over the octagonal floor plan with eight lateral niches. The pavilion is 30m wide and 8 meters tall.

This master’s thesis deals with the design and static assessment of a lookout tower in The Brno Zoological Garden situated on the hill called Mniší hora. The construction of the lookout tower is meant to be of a circular ground plan and its overall height is 31 m. The construction was designed in two variants. For both methods was used a combination of steel and solid or glued laminated timber. For detailed elaboration was selected only one variant. The lookout tower was assessed in a Scia Engineer 15.1 software.

The object of the diploma thesis is design and assessment of a steel lookout tower situated in Beskydy mountains. Two different variants were designed. The first variant is of square shaped plan and the second one is of hexagonal shaped plan. Both variants are spatial truss structures. They are shaped as hourglass. The variants were compared and the first one was chosen to be further developed. The lookout tower is 36 meters high and it is divided by floors. One floor is 3,6 meters high. The widest section is 8 meters, the narrowest section is 5 meters wide. The structure is pin-supported into concrete foundation. The concrete is class C25/30. The roof covering is made of trapezoidal sheet of class S280GD. Each steel element is made of steel of class S355.

This master thesis deals with the dynamic analysis of a footbridge. Computational model of the footbridge was created using ANSYS software. The model was subjected to dynamic wind load in longitudal and lateral direction. Furthermore pedestrian load in lateral direction was analyzed. Afterwards, due to unsatisfactory response to the pedestrian laod, a tuned mass damper was introduced to reduce the vibration. This lead to decrease in the vibration to a satisfactory levels, as is shown in the analyses of the model.

This thesis deals with static and dynamic analysis of an lookout tower construction. For dynamic analysis a computational model in ANSYS software is created. Static analysis is performed by Scia Engineer software. Both of this software use finite element method. It is also focused on wind load determination by Eurocode 1, structural factor calculation, modal analysis and vortex shedding. Verification of selected parts according to Eurocodes is included.

The subject of this thesis is the design and assessment of the supporting structure multifunctional building in the Czech Budejovice . The construction of a sphere with a maximum diameter of 30 m and a height of 19.5 meters the highest point . The supporting structure consists of curved ribs , elevator shaft and ceiling beams . The structure is designed in 4 versions . Two variants are made of steel, the third option is wooden and the latest version solves a combination of wood and steel. In the variant selected is done loading , ultimate limit state, serviceability limit state , fire resistance and compounds selected details.

The aim of this thesis was to develop assessments of existing supporting structure of a rectangular object and design of new options for rectangular and cylindrical object administrative center in the Jihomoravská plynárenská, a.s. in Brno. According to the task have been recalculated construction and design of new structures in accordance with applicable standards. New design of both buildings (rectangular and cylindrical) came from several studies.

The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.