1 |
Development of wind resource assessment methods and application to the Waterloo regionLam, Vivian January 2013 (has links)
A wind resource assessment of two sites in the Waterloo region, WRESTRC and RIM Park, was conducted using wind speed, wind direction, temperature and pressure data collected from meteorological towers for over two years. The study was undertaken as part of the W3 Wind Energy Project, and the equipment was purchased from NRG Systems and R. M. Young Company. The data was filtered to reduce the effect of icing and tower shadow, and was analyzed using MATLAB software.
Based on the mean wind speeds, small wind turbines less than 50 kW in capacity would be appropriate at both sites. Wind speeds tended to be stronger during the winter than the summer, and during the afternoon than the rest of the day. Both sites also exhibited a strong dominant wind direction -- from the northwest. Due to the terrain, the wind shear and turbulence intensity at WRESTRC were moderate when the wind flowed from the dominant direction, but very high from other directions. The wind shear and turbulence intensity at RIM Park were consistently moderate in all directions. Although the terrain seems more complex at WRESTRC, the wind speed distribution and estimated annual energy production were higher at WRESTRC than at RIM Park, which indicates that it is a more viable site. The estimated capacity factors ranged from 9.4% to 22% depending on the hub height, which is not nearly high enough to suggest a commercial wind farm would be viable at either site. A small 5 kW to 15 kW wind turbine in the Waterloo region could offset the electricity usage of an average home.
A two-parameter power law model of wind shear was explored and compared with the standard one-parameter model. In terms of goodness-of-fit, the two-parameter model did perform better. But in terms of accuracy of extrapolation, it was not conclusively better or worse than a one-parameter model forced through the known data point closest to the prediction height.
The relationship between turbulence intensity and measurement interval was examined. Since atmospheric flow is unsteady, they are not independent. The perceived turbulence intensity was found to increase exponentially with time intervals under 24 hours.
Two linear regression-based Measure-Correlate-Predict methods were evaluated using long-term data from a weather station also at WRESTRC. The ordinary least squares method was considered the baseline given its simplicity. The variance ratio method improved upon it by ensuring that the variance of the wind speed distribution at the target site was preserved.
|
2 |
Development of wind resource assessment methods and application to the Waterloo regionLam, Vivian January 2013 (has links)
A wind resource assessment of two sites in the Waterloo region, WRESTRC and RIM Park, was conducted using wind speed, wind direction, temperature and pressure data collected from meteorological towers for over two years. The study was undertaken as part of the W3 Wind Energy Project, and the equipment was purchased from NRG Systems and R. M. Young Company. The data was filtered to reduce the effect of icing and tower shadow, and was analyzed using MATLAB software.
Based on the mean wind speeds, small wind turbines less than 50 kW in capacity would be appropriate at both sites. Wind speeds tended to be stronger during the winter than the summer, and during the afternoon than the rest of the day. Both sites also exhibited a strong dominant wind direction -- from the northwest. Due to the terrain, the wind shear and turbulence intensity at WRESTRC were moderate when the wind flowed from the dominant direction, but very high from other directions. The wind shear and turbulence intensity at RIM Park were consistently moderate in all directions. Although the terrain seems more complex at WRESTRC, the wind speed distribution and estimated annual energy production were higher at WRESTRC than at RIM Park, which indicates that it is a more viable site. The estimated capacity factors ranged from 9.4% to 22% depending on the hub height, which is not nearly high enough to suggest a commercial wind farm would be viable at either site. A small 5 kW to 15 kW wind turbine in the Waterloo region could offset the electricity usage of an average home.
A two-parameter power law model of wind shear was explored and compared with the standard one-parameter model. In terms of goodness-of-fit, the two-parameter model did perform better. But in terms of accuracy of extrapolation, it was not conclusively better or worse than a one-parameter model forced through the known data point closest to the prediction height.
The relationship between turbulence intensity and measurement interval was examined. Since atmospheric flow is unsteady, they are not independent. The perceived turbulence intensity was found to increase exponentially with time intervals under 24 hours.
Two linear regression-based Measure-Correlate-Predict methods were evaluated using long-term data from a weather station also at WRESTRC. The ordinary least squares method was considered the baseline given its simplicity. The variance ratio method improved upon it by ensuring that the variance of the wind speed distribution at the target site was preserved.
|
3 |
The study of a mesoscale model applied to the prediction of offshore wind resourceHughes, James January 2014 (has links)
The Supergen wind research consortium is a group of research centres which undertake research primarily aimed at reducing the cost of offshore wind farming. Research is undertaken to apply the WRF mesoscale NWP model to the field of offshore wind resource assessment to assess its potential as an operational tool. WRF is run in a variety of configurations for a number of locations to determine and optimise a level of performance and assess how accessible that performance might be to an end user. Three studies set out to establish a level of performance at two different sites and improve performance through optimisation of model setup and post processing techniques. WRF was found to simulate wind speed to an appreciable level by reference to similar studies, though performance was found to vary throughout the course of the model runs and depending on the location. An average correlation coefficient of 0.9 was found for the Shell Flats resource assessment at 6-hourly resolution with an RMSE of 1.7ms-1. Performance at Scroby Sands was not at as high a level as that seen for Shell Flats with an average correlation coefficient for wind speed of 0.64 with an RMSE of 2ms-1. A range of variables were simulated by the model in the Shell Flats investigation to test the flexibility of the model output. Wind direction was produced to a moderate level of accuracy at 10-minute resolution while aggregated stability statistics showed the model had a good appreciation of the frequency of cases observed. Areas of uncertainty in model performance were addressed through model optimisation techniques including the generation of two ensembles and observational nudging. Both techniques were found to add value to the model output as well as improving performance. The difference between performance observed at Shell Flats and Scroby Sands shows that while the model clearly has inherent skill it is sensitive to the environment to which it is applied. In order to maximise performance, as large a computing resource as possible is recommended with a concerted effort to optimise model setup with the aim of allowing it to perform to its best ability. There is room for improvement in the application of mesoscale NWP to the field of offshore wind resource assessment but these results confirm an inherent skill in model performance. With the addition of further validation, improvements to model setup on a case by case basis and the application of optimisation techniques, it is anticipated mesoscale NWP can perform to a level which would justify its adoption operationally by the industry. The flexibility which can be offered relating to spatial and temporal coverage as well as the range of variables which can be produced make it an attractive option to developers if performance of a consistently high level can be established.
|
4 |
Urban Wind Flow Around an Isolated Building for Wind Resource Assessment of Small Scale WindElsayed, Ahmed Unknown Date (has links)
No description available.
|
5 |
An Assessment of the Discrepancy Between Operational Assessment and Wind Resource Assessment for a Wind Farm in IrelandGallagher, Johnny January 2014 (has links)
An accurate wind resource assessment (WRA) is crucial in energy prediction as the power is directly proportional to the wind speed cubed. This thesis analyses the discrepancy between operational assessment and WRA for a wind farm located on a moderately complex terrain in Ireland. As part of this research, a WRA was undertaken and the results were input to two wind farm design tools, WindPro and WindSim, to estimate the annual energy production. Two and a half years of data was available from a 50m met mast. The data was analysed and filtered to ascertain and limit the usage of erroneous data. The dataset was then correlated with an available online dataset utilising the Measure Correlate Predict (MCP) module in WindPro in order to estimate the long term wind resource at the site. The wind resource was then used to determine the annual energy produced at the site using both WindPro and WindSim. A loss of 8% was applied to the energy calculations for comparison with the original WRA. The results demonstrate the energy production from the original energy prediction, undertaken by a leading wind consultancy prior to construction, was overestimated by an average 10.19% over the three years of operation. The averaged wind speed at hub height in the original WRA was 8.2m/s. However, the prediction undertaken using WindPro in this study estimated an average hub height wind speed of 8.0m/s while WindSim estimated an average of 7.36m/s. These differing results had a significant contribution to the difference in Annual Energy Production (AEP). The calculated annual energy results were an overestimation of energy production by an average of 8.10% utilising WindPro, while WindSim underestimated the energy output by just 0.11%.
|
6 |
Improving numerical simulation methods for the assessment of wind source availability and related power production for wind farms over complex terrainIve, Federica 26 July 2022 (has links)
One of the Sustainable Development Goals set in 2015 by the United Nations aims to ensure access to affordable, reliable, sustainable, and modern energy for all, increasing the global share of renewable energy to 32-35% by 2030. Moving towards this goal, the University of Trento funded the interdepartmental strategic project ERiCSol (Energie Rinnovabili e Combustibili Solari), in order to promote the research on renewable energy storage and solar fuels. The research activity presented in this thesis lies in the framework of this project, focusing on the development of new advanced simulation approaches to improve the estimation of the wind resource availability and the related power production for Italian wind farms in complex terrain. The wind farms, operated by the company AGSM S.p.A., are located in two different geographical contexts: Rivoli Veronese and Affi are at the inlet of the Adige Valley, while Casoni di Romagna and Carpinaccio Firenzuola, are on the crest of the Apennines close to the borders between the provinces of Bologna e Firenze. The analysis of data from year-long field measurements highlighted the different peculiarities of these areas. The wind farms at the mouth of the Adige Valley are influenced by a daily periodic thermally-driven circulation, characterised by a nocturnal intense down-valley wind alternating with a diurnal weaker up-valley wind, while the Apennines wind farms are primarily affected by synoptic-scale winds. Simulations, with the mesoscale Weather Research and Forecasting (WRF) model, are performed and compared with field measurements in both cases, to highlight strengths and weaknesses. The results show that the model is able to capture with good accuracy wind speed and direction in the Apennines wind farms, while larger errors arise for Rivoli Veronese and Affi wind farms, where the intensity of the nocturnal down-valley wind is generally underestimated. Considering the former case, modelled and observed yearly wind speed density distributions are compared, in order to evaluate the impact of model errors in the estimation of the wind resource at these sites. Since reliable simulations of the wind resource are also essential to ensure the security in power transmission and to prevent penalties to energy operators, an analysis of the power production is also performed, to evaluate how errors in the estimate of the resource translate into errors in the estimate of the production. Considering the wind farms at the mouth of the Adige Valley, the research work mainly focuses on the evaluation of the impact of data assimilation by means of observational nudging on model results, in order to optimize the setup for operational forecasts. Different configurations are tested and compared, varying the temporal window for the assimilation of local data.
|
7 |
Use of synthetic aperture radar for offshore wind resource assessment and wind farm development in the UKCameron, Iain Dickson January 2008 (has links)
The UK has an abundant offshore wind resource with offshore wind farming set to grow rapidly over the coming years. Optimisation of energy production is of the utmost importance and accurate estimates of wind speed distributions are critical for the planning process. Synthetic aperture radar (SAR) data can provide synoptic, wide area wind field estimates at resolutions of a few kilometres and has great potential for wind resource assessment. This thesis addresses the key challenges for the operational implementation of SAR in this context; namely the accuracy of SAR wind retrievals and the ability of SAR to characterise the mean wind speed and wind power density. We consider the main stages of SAR wind retrieval; the retrieval algorithm; sources of a priori information; the optimal configuration of the retrieval system; and the challenges for and accuracy of SAR wind resource estimation. This study was conducted for the eastern Irish Sea in the UK, a region undergoing significant offshore wind energy development. A new wind retrieval algorithm was developed that implements a maximum a posterior probability (MAP) method drawn from Bayesian statistics. MAP was demonstrated to be less sensitive to input errors than the standard direction-based wind speed algorithm (DWSA) and provides a simple retrieval quality check via the error reduction ratio. Retrieval accuracy is strongly influenced by the quality of a priori information. The accuracy of two operationally viable a priori sources, mesoscale numerical weather prediction (NWP) data and WISAR image directions, was evaluated by comparison against in-situ wind observations and WERA coastal data. Results show that NWP wind speeds produce good wind speed and direction estimates with standard deviations of ¬±2 ms-1 and ±16o respectively. WISAR directions were less accurate producing standard deviations ranging from ±20o to ±29o, but were preferable when strong differences between NWP timesteps were observed. The accuracy of SAR wind retrievals was evaluated by comparison against in-situ wind observations. The MAP algorithm was found to provide modest improvements in retrieval accuracy over DWSA. Highest quality retrievals achieved using the CMOD5 forward model, producing wind speeds with a RMSE of 1.83 ms-1. Regarding the ability of SAR to estimate offshore wind resources, dataset density was found to be a controlling parameter. With 103 scenes available mean wind speeds were well characterised by comparison against in-situ observations and Wind Atlas results, while wind power density showed considerable errors. The accuracy of wind speed maps was further improved by accounting for wind direction and fetch effects upon the SAR wind distribution. A key strength of the SAR wind fields is their ability to identify the effect of mesoscale structures upon the surface wind field with atmospheric gravity waves observed in 30% of the images. These structures are shown to introduce wind speed fluctuations of up to ±2 ms-1 at scales of 5 to 10 km and may have significant implications for wind power prediction. These findings show that SAR may provide an important source of wide area wind speed observations as a complement to existing wind resource estimation techniques. SAR may be of particular use in coastal areas where complex wind fields are observed.
|
8 |
Use of harmony search to fit Weibull distribution in wind energy applications / UtilizaÃÃo da busca harmÃnica no ajuste da curva de Weibull em energia eÃlicaHÃlio de Paula Barbosa 21 January 2016 (has links)
CoordenaÃÃo de AperfeiÃoamento de NÃvel Superior / The wind resource assessment is a key step in the development of wind power generation projects. Minimizing errors in this step brings significant reliability gains for the whole project. In this study we sought a reduction in the errors associated with the adjustment of the Weibull distribution with respect to data collected by an improvement of this setting. With this purpose, it was applied the optimization algorithm of Harmonic Search (HS) to find the Weibull distribution parameters with the best fit. The HS was used to find the Weibull distribution parameters for two sets of data from the Sistema de OrganizaÃÃo de Dados Ambientais (SONDA) of the cities of Petrolina-PE and SÃo Martinho da Serra-RS. The
parameters of the HS were selected by two methods, one being a result of the novel combination of two other already presented in the literature. We therefore compared the errors for each one to determine which method provides better optimization. For evaluating the
quality setting, the root mean square error (RMSE) and the correlation coefficient were used. The HS-PA method uses a selection of random parameters but, results showed more stable than the IHS. It was found for the IHS method one RMSE = 0.006418 for Petrolina and RMSE = 0.008303 for SÃo Martinho da Serra. The HS-PA method presented a RMSE = 0.006419 for Petrolina and RMSE = 0.008303 for SÃo Martinho da Serra. The RMSE values for the traditional methods applied to the same data set, there were two or more times greater than those found by employing the Harmonic search. / A anÃlise de recurso eÃlico à uma etapa fundamental no desenvolvimento de projetos de geraÃÃo de energia eÃlica. A minimizaÃÃo dos erros nesta etapa traz ganhos significativos de confiabilidade para o projeto como um todo. Neste trabalho foi buscada uma diminuiÃÃo dos erros associados ao ajuste da distribuiÃÃo de Weibull em relaÃÃo aos dados coletados atravÃs de uma melhora deste ajuste. Visando tal intento, foi aplicado o algoritmo de otimizaÃÃo da Busca HarmÃnica (HS) para encontrar os parÃmetros da distribuiÃÃo de Weibull com o melhor ajuste. A HS foi utilizada para encontrar os parÃmetros da distribuiÃÃo de Weibull para dois conjuntos de dados provenientes do Sistema de OrganizaÃÃo de Dados ambientais (SONDA) das cidades de Petrolina-PE e SÃo Martinho da Serra-RS. Os parÃmetros da HS foram selecionados atravÃs de duas metodologias, sendo uma delas inovadora por resultar da combinaÃÃo de outras duas jà apresentadas anteriormente em literatura. Foram, portanto, comparados os erros referentes a cada uma para determinar qual mÃtodo fornecia uma melhor otimizaÃÃo. Para a avaliaÃÃo da qualidade do ajuste, foram utilizados o erro mÃdio quadrÃtico
(RMSE) e o coeficiente de correlaÃÃo. O mÃtodo HS-PA, embora utilize uma seleÃÃo de parÃmetros aleatÃria, apresentou resultados mais estÃveis do que o IHS. Foi encontrado para o mÃtodo IHS um RMSE = 0,006418 para Petrolina e RMSE = 0,008303 para SÃo Martinho da
Serra. O mÃtodo HS-PA apresentou um RMSE = 0,006419 para Petrolina e RMSE = 0,008303 para SÃo Martinho da Serra. Os valores de RMSE para os mÃtodos tradicionais aplicados ao mesmo conjunto de dados, foram duas ou mais vezes maiores do que os encontrados,
empregando a Busca HarmÃnica.
|
9 |
California Polytechnic State University Wind Resource AssessmentSmith, Jason Allan 01 September 2011 (has links) (PDF)
Wind resource assessment at California Polytechnic State University shows there is potential for wind power generation on Cal Poly land. A computational fluid dynamics model based on wind data collected from a campus maintained meteorological tower on Escuela Ranch approximately 5 miles northwest of campus suggests there are areas of Cal Poly land with an IEC Class III wind resource at a height of 80 meters above ground. In addition during the daytime when the campus uses the most energy there are large portions of land with annual average daytime wind speeds above 6.9m/s. These areas have been identified by analyzing the wind speed and directional data collected at the meteorological tower and using it to create the boundary conditions and turbulence parameters for the computer model. The model boundary conditions and turbulence parameters have been verified through comparison between data collected at Askervein hill in Scotland during the 1980’s and the results of a simulation of Askervein hill using the same model. Before constructing a wind farm for power generation, additional meteorological towers should be constructed in Poly Canyon to further confirm the wind resource prediction.
|
10 |
Wind Energy Assessment and Visualization Laboratory Extra-Tall Tower Wind Resource Assessment: Icing Rules and Trends in the DataHarris, James C. 25 July 2012 (has links)
No description available.
|
Page generated in 0.0593 seconds