No description available.

Geomagnetic disturbances that result from solar activities can affect technological systems such as power networks. They may cause DC currents in power networks and saturation of the core in power transformers that leads to destruction in the transformer performance. This phenomena result in unwanted influences on power transformers and the power system. Very asymmetric magnetization current, increasing losses and creation of hot spots in the core, in the windings, and the metallic structural parts are adverse effects that occur in transformers. Also, increasing demand of reactive power and malfunction of protective relays menaces the power network stability. Damages in large power transformers and blackouts in networks have occurred due to this phenomenon. Hence, studies regarding this subject have taken the attention of researchers during the last decades. However, a gap of a comprehensive analysis still remains. Thus, the main aim of this project is to reach to a deep understanding of the phenomena and to come up with a solution for a decrease of the undesired effects of GIC. Achieving this goal requires an improvement of the electromagnetic models of transformers which include a hysteresis model, numerical techniques, and transient analysis. In this project, a new algorithm for digital measurement of the magnetic materials is developed and implemented. It enhances the abilities of accurate measurements and an improved hysteresis model has been worked out. Also, a novel differential scalar hysteresis model is suggested that easily can be implemented in numerical methods. Two and three dimensional finite element models of various core types of power transformers are created to study the effect of DC magnetization on transformers. In order to enhance the numerical tools for analysis of low frequency transients related to power transformers and the network, a novel topological based time step transformer model has been outlined. The model can employ a detailed magnetic circuit and consider nonlinearity, hysteresis and eddy current effects of power transformers. Furthermore, the proposed model can be used in the design process of transformers and even extend other application such as analysis of electrical machines. The numerical and experimental studies in this project lead to understanding the mechanism that a geomantic disturbance affects power transformers and networks. The revealed results conclude with proposals for mitigation strategies against these phenomena. / <p>QC 20150210</p>

Les composants magnétiques planaires (inductance et transformateur) occupent une place importante dans certains circuits intégrés utilisés en haute fréquence. Leur miniaturisation et leur intégration vont de pair avec celles des circuits électroniques qui évoluent constamment surtout pour les appareils portables. Quelques travaux scientifiques ont permis d’identifier les différents mécanismes à l’origine de pertes dans les composants magnétiques planaires, afin de les limiter. Les pertes dans les enroulements sont classiquement prises en compte par une résistance r(f) fonction de la fréquence. La détermination, à partir des paramètres S obtenus par mesure ou simulation, de la résistance r(f) constitue à ce jour un sujet d’étude à part entière, les paramètres S étant les seuls paramètres que l’on peut obtenir au-delà de la centaine de MHz. Pour contribuer à la résolution de ce problème, nous avons proposé une méthode prenant en compte toutes les pertes dans le bobinage. Cette méthode de détermination de la résistance en fonction de la fréquence se fait dans trois domaines de fréquence : - en très basse fréquence, la rDC est obtenue par calcul ou mesurée à l’aide d’un matériel basse fréquence, - aux "moyennes fréquences" lorsque les impédances R et Lω ne sont pas trop différentes, les phénomènes capacitifs pouvant être négligés, - aux résonances en très haute fréquence. L’application de cette méthode sur trois structures différentes (inductance à air de plusieurs spires, à air à une spire en oméga et à une couche de matériau magnétique) a permis de : - observer une bonne corrélation entre simulation et mesure, -valider l’évolution des pertes en fonction de la fréquence, -séparer les effets de peau et de proximité, -séparer les pertes fer et les pertes cuivre pour une inductance à couche magnétique / Planar magnetic components (transformer and inductor) have become a big part in some integrated circuits used in high frequency. Miniaturization and integration of magnetic components go hand in hand with the ones of electronics that constantly evolves especially for portable devices. A few scientific studies have identified the different mechanisms of losses in planar magnetic components. Winding losses are generally taken into account using a resistance r(f) versus frequency.The use of scattering parameters S to determine resistance r(f) represents a comprehensive research project ; S parameters that can be obtained either by measurement or by simulation, are the only parameters which one can get at high frequencies (above 100MHz). To solve this problem, we have proposed a method taking into account all winding losses. Our approach for determining r(f) has to be applied in 3 frequency domains: - at very low frequency, r(f) = rDC and its value is either calculated or measured using low frequency equipment, - in the middle frequency range, capacitive coupling can be neglected while impedances R and Lω are in the same order of magnitude, - at very high resonance frequencies.This method has been implemented for 3 different structures (coreless inductor with several turns of coil, Omega shape coreless inductor with one turn and inductor with a magnetic layer) leads to : - observe a good correlation between simulation and measurement, - validate the evolution of losses versus frequency, - separate skin effects and proximity effects, - separate iron losses and winding losses

No description available.

The advent and proliferation of planar technologies for power converters are driven in part by the overall trends in analog and digital electronics. These trends coupled with the demands for increasingly higher power quality and tighter regulations raise various design challenges. Because inductors and transformers constitute a rather large part of the overall converter volume, size and performance improvement of these structures can subsequently enhance the capability of power converters to meet these application-driven demands. Increasing the switching frequency has been the traditional approach in reducing converter size and improving performance. However, the increase in switching frequency leads to increased power loss density in windings and core, with subsequent increase in device temperature, parasitics and electromagnetic radiation. An accurate set of reduced-order modeling methodologies is presented in this work in order to predict the high-frequency behavior of inductors and transformers. Analytical frequency-dependent expressions to predict losses in planar, foil windings and cores are given. The losses in the core and windings raise the temperature of the structure. In order to ensure temperature limitation of the structure is not exceeded, 1-D thermal modeling is undertaken. Based on the losses and temperature limitation, a methodology to optimize performance of magnetics is outlined. Both numerical and analytical means are employed in the extraction of transformer parasitics and cross-coupling. The results are compared against experimental measurements and are found to be in good accord. A simple near-field electromagnetic shield design is presented in order to mitigate the amount of radiation. Due to inadequacy of existing winding technology in forming suitable planar windings for PCB application, an alternate winding scheme is proposed which relies on depositing windings directly onto the core. / Master of Science

Le transport et la distribution de l'énergie électrique sont traditionnellement réalisés en alternatif (50 Hz ou 60 Hz), un des éléments-clés de ces infrastructures est le transformateur de puissance. Ce dernier est utilisé depuis plus d'un siècle et donc sa conception est maîtrisée (avec des rendements très élevés, supérieurs à 99 %). Depuis quelques années, la part des énergies renouvelables est en constante augmentation. Bien souvent, la production des énergies renouvelables est éloignée des centres de consommation. Or, le transport en courant continu sous haute tension (HVDC) sur de grandes distances est plus rentable. Dans ce cas, nous avons besoin de convertisseurs de puissance fonctionnant pour certains avec des Transformateurs Moyennes Fréquences (TMF) entre 1 kHz et quelques dizaines de kilohertz. Dans ces applications, la recherche du rendement maximal est primordiale. L'augmentation de la fréquence de fonctionnement a pour effet bénéfique de diminuer l'encombrement d'un transformateur. Cependant un certain nombre de problèmes vont apparaître avec cette augmentation. Nous pouvons citer : les pertes dans les conducteurs et dans le circuit magnétique sont liées à la fréquence ; le type de bobinages (fil de Litz et feuillard) et les matériaux magnétiques (ferrites et nanocristallins) en moyennes fréquences sont différents de ceux utilisés en 50 Hz ; le refroidissement est plus complexe car la densité de puissance volumique est plus élevée... Ainsi dans cette thèse, nous avons mis en place une méthodologie de conception afin de maîtriser au mieux le dimensionnement d'un TMF avec un compromis précision et coût de calculs. Nous avons identifié les modèles (analytiques et numériques) susceptibles d'être utilisés pour estimer les performances d'un TMF. Deux TMF d'une puissance de 180 kVA et de 1 kVA ont été dimensionnés, fabriqués et testés afin de mettre en évidence le domaine de validité et d'ajuster les différents modèles. Ce travail nous a permis de mettre en place une méthodologie de conception allant des spécifications du convertisseur jusqu'à la simulation de celui-ci avec le modèle du transformateur dimensionné. Nous avons mis en évidence : l'influence de paramètres technologiques sur l'élévation de la résistance pour des bobinages de type feuillard et l'influence de paramètres technologiques sur les propriétés magnétiques des matériaux nanocristallins. Ce travail de thèse a été réalisé avec le groupe « Matériaux du Génie Electrique » du laboratoire Ampère et financé par l'institut pour la transition énergétique SuperGrid Institute / The transmission and distribution of electric power is normally made by ac networks (50 Hz or 60 Hz), where one of the key elements of this infrastructure is the power transformer; used for more than a century, its design is very well understood, with a level of operating efficiency normally greater than 99%. In recent years, the share of renewable energy has been increasing. Often times the energy generated from renewable sources is produced far from consumption centers, and so transportation in the form of high voltage direct current (HVDC) over long distances is more profitable, due to the lower losses seen than with HVAC after a certain length of transmission line. In this case, we need power converters operating with Medium Frequency Transformers (MFT) from 1 kHz to tens of kilohertz. For these applications, the research of their maximum efficiency in operation is paramount. Increasing the transformer operating frequency has the beneficial effect of reducing its size. However, a number of problems will appear with this frequency increase, such as: the increase in the losses in the conductors and the magnetic circuit that are related to the frequency; the less well understood winding type (Litz wire and foil) and magnetic materials (ferrites and nanocrystalline) in the MF that are different from those used at 50 Hz; the cooling is more complex because the power density is higher, etc. In this thesis, a design methodology was developed in order to optimise the design of MFTs with respect to the compromise between accuracy and the length of calculations. In addition, analytical and numerical models were identified that can be used to accurately estimate the performance of an MFT. Furthermore, two MFTs (apparent power: 180 kVA and 1 kVA, respectively) were sized, manufactured and tested in order to demonstrate the domain of validity of the models, and also for optimisation of the different models. This work has enabled the development of a design methodology using the converter specifications and build a simulation with complete model of the transformer, which can then be used to validate an MFT design. We have highlighted: the influence of the technological parameters on the rise of resistance in the foil coils and the influence of the technological parameters on the magnetic properties of nanocrystalline materials. This work was performed with the group "Materials for Electrical Engineering" Ampère laboratory and funded by the Institute for Energy Transition SuperGrid Institute.

In the first part of the master’s thesis dealing with the increasing efficiency of induction motors there are briefly presented basic information about induction motors, followed by an overview of the losses of induction motors. The next part deals with the ways to increase efficiency of induction motors without increasing tooling costs. The practical part consists of four measurements of four induction motors, with their various mechanical adjustments to make comparing benefits of these modifications possible. The measured results are compared by a finite element method in Maxwell 2D Design program, in which the same motors are simulated as measured. Theoretical knowledge about the increase of efficiency is practically applied while being implemented in the simulations.

The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.