Return to search

Digitally Beamformed 2D Scanning Phased Array Radar for Networked Unmanned Air Vehicle Detection and Tracking

Radar systems vary significantly in size, weight, power, and cost (SWaP-C) characteristics with many high SWaP-C models being inaccessible to consumers. Recognizing this, we have engineered an effective but low SWaP-C networked radar system tailored for detecting and tracking unmanned air vehicle (UAV) traffic. Using field-programmable gate arrays (FPGAs), and custom-designed printed circuit boards (PCBs), our system achieves remarkable efficiency without compromising performance. We use patch antennas for our transmitter and in our 4x4 receiver array. With our low SWaP-C system we have successfully concluded outdoor range testing, detecting corner reflector targets at a remarkable 10dB above our noise floor up to a distance of 100m. We have also finished testing and implementation of our angle of arrival (AOA) algorithm, using conjugate field matched (CFM) beamforming, with outdoor testing using both corner reflectors and drones. Combining our range and AOA algorithms we have detected and tracked both a corner reflector and a drone through time and created a 3D plot showing our target's path and location relative to our system. With this we have demonstrated the viability and effectiveness of our low SWaP-C radar for UAV traffic surveillance.

Identiferoai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-11398
Date28 May 2024
CreatorsBrown, Carson Reed
PublisherBYU ScholarsArchive
Source SetsBrigham Young University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations
Rightshttps://lib.byu.edu/about/copyright/

Page generated in 0.0014 seconds