This thesis presents the development of a design procedure for buckling-restrained braced frames (BRBF's). This procedure uses nonlinear time history analysis and a formal optimization algorithm. The time history analysis includes an elasto-plastic model for the braces. The optimization algorithm is a genetic algorithm. This procedure is referred to throughout the thesis as the "Nonlinear Time History Analysis Procedure with Optimization" (NTHO). Current design specifications for BRBF's are based on inelastic design spectra and approximate formulas for the determination of natural period. These spectra are used to obtain seismic base shear, and the distribution of equivalent lateral forces. Yielding and drift criteria are then used to determine brace areas. This design procedure is referred to throughout the thesis as the "Equivalent Lateral Force Procedure" (ELF). The thesis compares results from the NTHO and ELF procedures for a variety of BRBF's and levels of seismicity. The ELF procedure is judged against the more accurate NTHO procedure, and BRBF's are identified where the ELF procedure produces unconservative and excessively conservative designs. Since the NTHO procedure is more computationally expensive than the ELF procedure, design charts are developed for quickly sizing brace areas for a variety of BRBF's based on the NTHO procedure. Among the conclusions at the end of the thesis is the surprising result that the design charts show a near linear variation of brace area from story to story.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-2486 |
| Date | 28 August 2007 |
| Creators | Balling, Lukas |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.0014 seconds