We had demonstrated that, by controlling and changing the temperature, reaction time and washing agents, the morphology and powder size of CuInSe2 can be altered considerably. CuInSe2 was synthesized by a solvothermal route as described by Y. Qian et al. By synthesizing nanorods, we can control the distance which the electrons are transported in hybrid solar cell with conjugated polymers. With the tuning of the band gap by controlling the nanorod length, we can increase the opportunity of orbits overlap between the CuInSe2 material and the PBO polymer matrix..
The synthetic temperature 1800C and reaction time 48 hrs are the best condition in our experiment. By using D.I water and ethanol as washing agents, we can find different morphology of spherical and nanowire. However, we fabricate hybrid solar cell by using these CuInSe2 powders in PBO conjugated polymers. By preparing hybrid solution in different concentration and controlling spin coating rate, we fabricate solar cells device successfully. From the I-V characteristics, we can get noticeable characteristics of diode. Then, we calculate the fill factor (F.F.) with the open-circuit voltage¡]Voc¡^and short-circuit current¡]Isc¡^
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0705105-164008 |
| Date | 05 July 2005 |
| Creators | Lu, Wei-Lun |
| Contributors | Yaw-Shyan Fu, Bae-Heng Tseng, Mau-Phon Houng, S-J. Bai |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0705105-164008 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.007 seconds