Return to search

Laboratory Modeling of Erosion Potential of Earthen Embankments in Contact With Open Bedrock Joints

Earthen dams are often built into bedrock abutments and on bedrock foundations. Bedrock joints naturally occur in bedrock materials. These bedrock joints create voids for ground water to pass through. Historically earthen dams were sometimes built in direct contact with the bedrock joints, causing a contact point between the soil of the dam and the flowing water. It has been engineering practice to place grout into exposed bedrock joints for some time now. However, soil is not always cleaned out of bedrock joints before they are grouted, which leaves a weakness for water to push through.
The purpose of this study is to understand the point at which water flowing through bedrock joints will erode soil from the earthen dam embankment. The information of how much soil is eroded away in an amount of time is also crucial to the scope of this study.
The goals of this study were accomplished by building a physical model or apparatus of an earthen dam embankment on top of a simulated bedrock joint. Different soil types were tested in the apparatus to start a database of information about erosion rates of the soil along the bedrock joint and embankment interface. These results will be used to start a database for organizations that assign probabilities of dam failures. The purpose of the study is not to indicate when dams will fail, but to help with assigning probabilities of the likelihood of a serious problem being caused from this type of mechanism presented in this study.

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-4889
Date01 May 2014
CreatorsZaleski, Joseph T.
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu).

Page generated in 0.0022 seconds