Return to search

A New Visco-Plastic Device for Seismic Protection of Structures

A new visco-plastic damper for seismic protection is introduced. This device combines and enhances many of the proven characteristics of both displacement-dependent and velocity-dependent devices.

The device consists of a block of a high-damping viscoelastic material sandwiched between two steel shapes (plates or channels) bent in a certain configuration to amplify the deformations in the device in order to obtain large tensile and compressive strains in the viscoelastic material. Under low levels of vibrations, the device dissipates energy through amplified strains in the viscoelastic material only; however, under moderate to strong levels of vibrations, a new source of energy dissipation is added through the yielding of the steel elements. The inelastic behavior of the steel elements is controlled by the rigidity of the viscoelastic material. In addition to the energy dissipation, the device provides stiffness through the steel elements as well as the viscoelastic material. Moreover, one of the main advantages of the device is that its behavior is fully controlled through different parameters.

First, a nonlinear time history analysis was conducted on structures with a preliminary model of the device using SAP2000 program to check the effectiveness of the device on the response of different structures under ground excitations. The device resulted in better improvement in the structural response compared to the existing viscoelastic dampers.

A three-dimensional finite element model was developed for the device using the finite element package, ABAQUS. The hyperelastic and viscoelastic behavior of the block of the viscoelastic material were considered. The inelastic behavior of the steel elements was considered as well using the Von Mises yielding criterion. The device was analyzed under different dynamic loadings with different frequencies.

Three simplified models were developed using SAP2000 program in order to facilitate the modeling of the device for structural engineers. These models were compared to the detailed finite element model to check their accuracy. The best model was used in the analysis of a multi-story steel frame with the visco-plastic devices under different ground excitations. Two different arrangements of the device were considered. The devices caused significant reduction in the story displacements, base shear and bending moment at column bases. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/26193
Date18 February 2005
CreatorsIbrahim, Yasser El-Husseini
ContributorsCivil Engineering, Charney, Finley A., Murray, Thomas M., Plaut, Raymond H., Roberts-Wollmann, Carin L., Singh, Mahendra P.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeDissertation
Formatapplication/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationYasser_Ibrahim_Dissertation.pdf

Page generated in 0.0022 seconds