Return to search

Mixed RTL and gate-level power estimation with low power design iteration / Lågeffektsestimering på kombinerad RTL- och grind-nivå med lågeffekts design iteration

<p>In the last three decades we have witnessed a remarkable development in the area of integrated circuits. From small logic devices containing some hundred transistors to modern processors containing several tens of million transistors. However, power consumption has become a real problem and may very well be the limiting factor of future development. Designing for low power is therefore increasingly important. To accomplice an efficient low power design, accurate power estimation at early design stage is essential. The aim of this thesis was to set up a power estimation flow to estimate the power consumption at early design stage. The developed flow spans over both RTL- and gate-level incorporating Mentor Graphics Modelsim (RTL-level simulator), Cadence PKS (gate- level synthesizer) and own developed power estimation tools. The power consumption is calculated based on gate-level physical information and RTL- level toggle information. To achieve high estimation accuracy, real node annotations is used together with an own developed on-chip wire model to estimate node voltage swing. </p><p>Since the power estimation may be very time consuming, the flow also includes support for low power design iteration. This gives efficient power estimation speedup when concentrating on smaller sub- parts of the design.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-1685
Date January 2003
CreatorsNilsson, Jesper
PublisherLinköping University, Department of Electrical Engineering, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, text
RelationLiTH-ISY-Ex, ; 3296

Page generated in 0.0021 seconds