Return to search

Digital resampling and timing recovery in QAM systems

Digital resampling is a process that converts a digital signal from one sampling rate to another. This process is performed by means of interpolating between the input samples to produce output samples at an output sampling rate. The digital interpolation process is accomplished with an interpolation filter.<p>
The problem of resampling digital signals at an output sampling rate that is incommensurate with the input sampling rate is the first topic of this thesis. This problem is often encountered in practice, for example in multiplexing video signals from different sources for the purpose of distribution. There are basically two approaches to resample the signals. Both approaches are thoroughly described and practical circuits for hardware implementation are provided. A comparison of the two circuits shows that one circuit requires a division to compute the new sampling times. This time scaling operation adds complexity to the implementation with no performance advantage over the other circuit, and makes the 'division free' circuit the preferred one for resampling.<p>
The second topic of this thesis is performance analysis of interpolation filters for Quadrature Amplitude Modulation (QAM) signals in the context of timing recovery. The performance criterion of interest is Modulation Error Ratio (MER), which is considered to be a very useful indicator of the quality of modulated signals in QAM systems. The methodology of digital resampling in hardware is employed to describe timing recovery circuits and propose an approach to evaluate the performance of interpolation filters. A MER performance analysis circuit is then devised. The circuit is simulated with MATLAB/Simulink as well as implemented in Field Programmable Gate Array (FPGA). Excellent agreement between results obtained from simulation and hardware implementation proves the validity of the methodology and practical application of the research works.

Identiferoai:union.ndltd.org:USASK/oai:usask.ca:etd-11292010-160333
Date29 November 2010
CreatorsDuong, Quang Xuan
ContributorsKoustov, Sasha, Wahid, Khan, Salt, Eric, Nguyen, Ha
PublisherUniversity of Saskatchewan
Source SetsUniversity of Saskatchewan Library
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://library.usask.ca/theses/available/etd-11292010-160333/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.002 seconds