Comprehensive investigations of the electron field emission (FE) properties of annealed single crystal and polycrystalline molybdenum plugs, which are used as substrates for actual alkali-based photocathodes were performed with a FE scanning microscope. Well-polished and dry-ice cleaned Mo samples with native oxide did not show parasitic FE up to a field level of 50 MV/m required for photoinjector cavities. In situ heat treatments (HT) above 400°C, which are usual before photocathode deposition, activated field emission at lower field strength. Oxygen loading into the Mo surface, however, partially weakened these emitters. X-ray photoelectron spectroscopy of comparable Mo samples showed the dissolution of the native oxide during such heat treatments. These results reveal the suppression of field emission by native Mo oxides. Possible improvements for the photocathode preparation will be discussed.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:39022 |
| Date | 02 September 2020 |
| Creators | Lagotzky, Stefan, Barday, Roman, Jankowiak, Andreas, Kamps, Thorsten, Klimm, Carola, Knobloch, Jens, Müller, Günter, Senkovsky, Boris, Siewert, Frank |
| Publisher | Cambridge University Press |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:article, info:eu-repo/semantics/article, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 1286-0042, 1286-0050, 10.1051/epjap/2015150167 |
Page generated in 0.0019 seconds