<p>In this report the two-tone PLL circuit intended for on-chip test of RF blocks is presented. The primary application is the third order intermodulation test (TOI), vital for RF front-ends. If the spectral analysis can also be completed by DSP available on the chip or on board, it provides a built in self-test (BiST) which can replace costly test instrumentation (ATE). The advantage of the designed two-tone PLL is that it practically prevents the locking effect while keeping the two oscillation frequencies close. Also by careful design the possible intermodulation distortion of the two-tone stimulus can be avoided.</p><p>The two-tone PLL has been designed and verified at the system level using Verilog-A models in Cadence <sup>TM. </sup>Besides, two building blocks of the PLL were implemented at the circuit level in 90nm CMOS technology. The obtained results are promising in terms of a practical two-tone BiST implementation.</p>
Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-18590 |
Date | January 2009 |
Creators | Shuaib, Muhammad |
Publisher | Linköping University, Department of Electrical Engineering |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, text |
Page generated in 0.0014 seconds