Este estudo descreve a obtenção e caracterização de bioblendas de PLLA/HIPS de diferentes composições, compatibilizadas por copolímero em bloco PS-b-PLA. Além de mistura via fundido a 180 e 210°C, uma nova estratégia de preparação de bioblendas PS/HIPS e PLLA foi desenvolvida via método in situ, através da polimerização de estireno na presença do PLA. O copolímero em bloco PS-b-PLA foi eficiente como compatibilizante interfacial e permitiu controle da morfologia em bioblendas de PLLA e HIPS em determinadas condições de mistura, fato comprovado por análises de microscopia eletrônica de transmissão e varredura. Copolímeros PS-b-PLA de diferentes composições foram obtidos a partir de PS com terminação hidroxila (OH-PS-Br) como macroiniciador da polimerização por abertura de anel de lactídeo. A rota inversa, empregando o PLA funcionalizado com 2,2,2 tribromoetanol (PLA-Br) como macroiniciador da ATRP do estireno, também se mostrou uma rota sintética eficiente para obtenção do copolímero. O OH-PS-Br foi sintetizado via polimerização radicalar por transferência de átomo (ATRP) convencional e via regeneração de ativadores por transferência de elétrons (ATRP-ARGET). A simplificação e aumento da taxa de reação da ATRP-ARGET do estireno foram explorados através da alteração das variáveis de reação. O aumento da temperatura de reação de 90°C para 100°C praticamente dobrou a taxa de polimerização do estireno. De forma controlada, a reação foi conduzida sob atmosfera oxidativa, sem purificação adicional para retirada do inibidor do estireno, e usando etilbenzeno como solvente. / This study describes the preparation and characterization of PLLA/HIPS bioblends of various compositions which were compatibilized by PS-b-PLA block copolymer. Bioblends were obtained by melt mixing at 180 and 210 °C, and also by a new way to prepare PLLA/HIPS compositions via in situ polymerization of styrene in the presence of PLA. The PS-b-PLA block copolymer was effective as a compatibilizer and allowed some control over PLLA/HIPS bioblends morphology in some mixing conditions, which was confirmed by transmission and scanning electron microscopy. PLA-b-PS copolymers of different compositions were obtained from hydroxyl-terminated PS (OH-PS-Br) as a macroinitiator for the ring opening polymerization of lactide. The reverse route using 2,2,2-tribromoethanol functionalized PLA (PLA-Br) as macroinitiator for ATRP of styrene also was an efficient synthetic strategy to obtain the copolymer. The OH-PS-Br was synthesized via conventional atom transfer radical polymerization (ATRP) and by activators regenerated by electron transfer (ATRP-ARGET). The influence of the main reaction parameters of the ATRPARGET of styrene was studied aiming for reaction rate increase and simplification. Increasing the reaction temperature from 90°C to 100°C almost doubled the rate of styrene polymerization. The reaction was also succesfully conducted under oxidative atmosphere, without additional purification for styrene inhibitor removal, and by using ethylbenzene as solvent.
Identifer | oai:union.ndltd.org:IBICT/oai:lume.ufrgs.br:10183/88554 |
Date | January 2013 |
Creators | Grassi, Vinícius Galhard |
Contributors | Petzhold, Cesar Liberato |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | Portuguese |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis |
Format | application/pdf |
Source | reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0018 seconds