Master of Science / Department of Grain Science and Industry / Leland McKinney / The current forage handling equipment in the cellulosic ethanol industry is severely limited by the low bulk densities of baled and ground biomass. Low bulk densities contribute to flowability problems and lack of maximizing trailer capacities. By pelleting we can increase the bulk density and flowability characteristics of forages. The objectives of this research were to evaluate (1) the energy requirements of grinding sorghum stalks, corn stover, wheat straw and big bluestem through two different screen sizes, (2) the energy requirements of pelleting forages from the two grind sizes, and (3) the physical properties of our various end products. The two screen types were found to have significantly different energy consumptions from each other (P<.0001). The majority of the four forage types were also found to have significantly different energy consumptions for grinding from each other (P<.0001). The exception was big bluestem vs. corn (P=.2329). All of the 1/8” vs. 1/8” and 1/8” vs. 3/8” grinds were significantly different from each other (Most P<.0001 and all at least P<.05). 3/8” sorghum was significant against all other 3/8” forage types. No other comparisons were significant for 3/8” vs. 3/8” (All 3/8” sorghum P<.0001). Production rate through the 3/8” screen was almost 3 times that of the 1/8” screen (Average of 400 lb/hr vs. 150 lb/hr). The two screen types were found to have significantly different energy consumptions for pelleting from each other (P<.0001). The four forage types were also found to have significantly different energy consumptions from each other (P<.0001) while the big blue vs. wheat did not. (P=.1192). Particle length for the 1/8” grind ranged from .06 inches to .07 inches, while the 3/8” grind ranged from .08 inches to .12 inches. Pelleting increased bulk density from 6.24 lb/ft3 to 9.99 lb/ft3 for biomass grinds to 31.17 lb/ft3 to 43.77 lb/ft3 for pelleted biomass. Pellet quality ranged from 93% to 98%. A cost analysis indicated that it would take roughly $20 extra per ton for the transportation, pre-processing and storage of pelleted cellulosic biomass than whole corn. This cost is still almost half that of the cost for baled biomass.
| Identifer | oai:union.ndltd.org:KSU/oai:krex.k-state.edu:2097/12003 |
| Date | January 1900 |
| Creators | Wilson, Jonathan |
| Publisher | Kansas State University |
| Source Sets | K-State Research Exchange |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0015 seconds