Deep knowledge of combustion phenomena is of great scientific and technological interest. In fact, better design of combustion equipments (furnaces, boilers, engines, etc) can contribute both in the energy efficiency and in the reduction of pollutant formation. One of the limitations to design combustion equipments, or even predict simple flames, is the resolution of the mathematical formulation. Analytical solutions are not feasible, and recently numerical techniques have received enormous interest. Even though the ever-increasing computational capacity, the numerical resolution requires large computational resources due to the inherent complexity of the phenomenon (viz. multidimensional flames, finite rate kinetics, radiation in participating media, turbulence, etc). Thus, development of capable mathematical models reducing the complexity and the stiffness as well as efficient numerical techniques are of great interest.The main contribution of the thesis is the analysis and application of the laminar flamelet concept to the numerical simulation of both laminar and turbulent non-premixed flames. Assuming a one-dimensional behavior of combustion phenomena in the normal direction to the flame front, and considering an appropriate coordinates transformation, flamelet approaches reduce the complexity of the problem.The numerical methodology employed is based on the finite volume technique and a parallel multiblock algorithm is used obtaining an excellent parallel efficiency. A post-processing verification tool is applied to assess the quality of the numerical solutions.Before dealing with flamelet approaches, a co-flow partially premixed methane/air laminar flame is studied for different levels of partial premixing. A comprehensive study is performed considering different mathematical formulations based on the full resolution of the governing equations and their validation against experimental data from the literature. Special attention is paid to the prediction of pollutant formation.After the full resolution of the governing equations, the mathematical formulation of the flamelet equations and a deep study of the hypothesis assumed are presented. The non-premixed methane/air laminar flame is considered to apply the flamelet modelling approach, comparing the results with the simulations obtained with the full resolution of the governing equations. Steady flamelets show a proper performance to predict the main flame features when differential diffusion and radiation are neglected, while unsteady flamelets are more suitable to account for these effects as well as pollutant formation. Assumptions of the flamelet equations, the scalar dissipation rate modelling, and the evaluation of the Lagrangian flamelet time for unsteady flamelets are specially analysed. For the numerical simulation of turbulent flames, the mathematical formulation based on mass-weighted time-averaging techniques, using RANS EVM two-equation models is considered. The laminar flamelet concept with a presumed PDF is taken into account. An extended Eddy Dissipation Concept model is also applied for comparison purposes. A piloted non-premixed methane/air turbulent flame is studied comparing the numerical results with experimental data from the literature. A clear improvement in the prediction of slow processes is shown when the transient term in the flamelet equations is retained. Radiation is a key aspect to properly define the thermal field and, consequently, species such as nitrogen oxides. Finally, the consideration of the round-jet anomaly is of significant importance to estimate the flame front position.In conclusion, flamelet modelling simulations are revealed to be an accurate approach for the numerical simulation of laminar and turbulent non-premixed flames. Detailed chemistry can be taken into account and the stiffness of the chemistry term is solved in a pre-processing task. Pollutant formation can be predicted considering unsteady flamelets.
| Identifer | oai:union.ndltd.org:TDX_UPC/oai:www.tdx.cat:10803/6680 |
| Date | 18 February 2005 |
| Creators | Claramunt Altimira, Kilian |
| Contributors | Cònsul Serracanta, Ricard, Universitat Politècnica de Catalunya. Departament de Màquines i Motors Tèrmics |
| Publisher | Universitat Politècnica de Catalunya |
| Source Sets | Universitat Politècnica de Catalunya |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis, info:eu-repo/semantics/publishedVersion |
| Format | application/pdf |
| Source | TDX (Tesis Doctorals en Xarxa) |
| Rights | info:eu-repo/semantics/openAccess, ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs. |
Page generated in 0.0026 seconds