This project is about automating foam quality control. Its purpose is to construct an automated quality-control station that will characterise foam in line with a production line that non-technical persons can efficiently operate. Foam passes through the station on a purpose-built conveyor. A robot then moves a microscope over the foam to capture detailed close-up images. The characterisation is done in software by examining the foam’s pores and measuring it against a set of tweakable parameters. There were some problems in focusing the microscope, but testing resolved the focusing to be non-essential. A database is used with the quality control station to store and sort test data efficiently. The overall quality control station is a success and can characterise foam according to the project’s predefined goals.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hh-47435 |
| Date | January 2022 |
| Creators | Wahlberg, William, Nilsson, Erik |
| Publisher | Högskolan i Halmstad, Akademin för informationsteknologi |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0027 seconds