Return to search

Effect Of Resin And Fiber On The Abrasion, Impact And Pressure Resistance Of Cylindrical Composite Structures

The aim of this study was to investigate the effects of resin and fiber on the abrasion, impact and internal pressure resistances of fiber reinforced plastic composite pipes produced by continuous filament winding method. For this study, pipe samples were produced with different combinations of resin type, fiber type, fiber amount and fiber length. All the samples were tested in accordance with the related ISO (International Organization for Standardization), DIN (German Standardization Institution) and BSI (British Standards Institution) standards. Three types of resins were used as ortophthalic, isophthalic and vinylester / two types of fibers were used as E-glass and ECR-glass and one type of GLASSFLAKES was used as C-glass. It was observed that the type of resin did not have any significant effect on burst pressure. However, the vinylester resin had a considerable positive effect on the abrasion and impact resistances. Moreover, it was observed that the type of fiber did not have any significant effect on impact and internal pressure resistances, but the use of C-glass GLASSFLAKES resulted in a positive effect on the abrasion resistance. Additionally, it was found that the increase in the amount of glass fiber resulted in increase of burst pressure, impact and abrasion resistances. Finally, it was observed that the length of glass fiber did not have any significant effect on abrasion resistance, but the decrease in fiber length resulted in a higher internal pressure and impact resistances.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12613287/index.pdf
Date01 June 2011
CreatorsKaya, Derya
ContributorsYilmazer, Ulku
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for METU campus

Page generated in 0.0015 seconds