Return to search

Hot-Wire Anemometer Measurements of Atmospheric Surface Layer Turbulence via Unmanned Aerial Vehicle

An instrumented unmanned aerial vehicle (UAV) was developed and employed to observe the full range of turbulent motions that exist within the inertial subrange of atmospheric surface layer turbulence. The UAV was host to a suite of pressure, temperature, humidity, and wind sensors which provide the necessary data to calculate the variety of turbulent statistics that characterize the flow. Flight experiments were performed with this aircraft, consisting of a large square pattern at an altitude of 100 m above ground level. In order to capture the largest turbulent scales it was necessary to maximize the size of the square pattern. The smallest turbulent scales, on the other hand, were measured through the use of a fast response constant temperature hot wire anemometer. The results demonstrates that the UAV system is capable of directly measuring the full inertial subrange of the atmospheric surface layer with high resolution and allowing for the turbulence dissipation rate to be calculated directly.

Identiferoai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:me_etds-1147
Date01 January 2019
CreatorsCanter, Caleb A.
PublisherUKnowledge
Source SetsUniversity of Kentucky
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations--Mechanical Engineering

Page generated in 0.002 seconds