A microbubble dispersion (MBD) was used to supply oxygen for an aerobic fermentation of Baker's yeast. The 1-liter microbubble dispersion generator supplied bubbles for 20-liter and 50-liter working volume fermentations in a 72-liter pilot scale fermenter. The microbubbles were stabilized by the surfactants naturally present in the culturing broth medium. The growth patterns of yeast Saccharomyces cerevisiae, cultured at agitation speeds of 150 rpm and 500 rpm, were compared for oxygen supplied by ordinary air sparging and by MBD sparging. Both air sparged and MBD systems were supplied air at equivalent volumetric flow rates.
The volumetric oxygen transfer coefficients (KLa) were estimated by the yield coefficient method. The KLa values increased from 142.5 to 458.3 h-1 and from 136.1 to 473.3 h-1 for 20- and 50- liter runs, respectively, as the agitation speed was increased from 150 to 500 rpm in the ordinary air sparged fermentations. The oxygen transfer coefficients in the MBD sparged fermentations were found to be independent of the fermenter agitation speed at approximately 480 h-1 for 20-liter runs and 340 h-1 for 50-liter runs. The growth rates for MBD at 150 rpm were essentially equivalent with air sparged fermentations at 500 rpm. The total power consumption per unit volume of broth for the 150 rpm, MBD fermentation was 68% lower than the 500 rpm, air sparged run for the 20-liter fermentations and was 55% lower for the 50-liter fermentations. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/35468 |
| Date | 26 November 1997 |
| Creators | Hensirisak, Patcharee Jr. |
| Contributors | Biological Systems Engineering, Cundiff, John S., Velander, William H., Diehl, Kenneth C. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | thesis.pdf |
Page generated in 0.0042 seconds