The goal of this research is to investigate the fundamentals of fracturing processes in heterogeneous materials such as concrete using geophysical methods and dynamic micromechanical models. This work describes how different aspects of fracture formation in concrete can be investigated using a combination of Acoustic Emission (AE) techniques, ultrasonic wave velocity imaging, and high resolution Computed Tomography (CT). Fracture formation and evolution were studied during shear failure of large reinforced concrete beams and compressive failure of concrete samples.
AE analysis includes studying complex spatial and temporal fracture development that precedes shear failure. Predominant microcrack mechanisms were analyzed at different stages of fracture formation. CT images were used to investigate the influence of concrete microstructure on fracture topography. Combined AE and CT damage evaluation techniques revealed different aspects of fracture development, thus expanding our understanding of AE events and their mechanisms. These images show how aggregate particles influence fracture nucleation and development. An emphasis has been placed on the role of coarse aggregates during the interlocking of fracture surfaces at transferring shear stresses.
Ultrasonic wave velocity and AE techniques have been applied to uniaxial compression tests of concrete with various aggregate sizes and strengths similar to that of the concrete beams. AE parameters, p-wave velocities, and stress-strain data have been analyzed concurrently to image damage evolution under compression. Influence of material composition on microcracking and material state changes during loading has been investigated in detail. The results of compressive tests were used as building blocks for developing realistic micromechanical numerical models of concrete.
The models were designed using a distinct element code, where material is modelled through the combination of bonded particles. A number of procedures were developed to transfer the exact microstructure of material incorporating its visual representation into the model. The models’ behaviour has been verified against experimental data. It was shown that these models exhibit realistic micromechanical behaviour. The results of the experimental investigation of concrete fracturing were expanded by modelling more cases with aggregate size and strength variations.
It was shown that geophysical imaging techniques, along with advanced micromechanical numerical modelling, can help us understand damage formation and evolution.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/24780 |
| Date | 13 August 2010 |
| Creators | Katsaga, Tatyana |
| Contributors | Young, R. Paul |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0028 seconds