abstract: The aging mechanism in devices is prone to uncertainties due to dynamic stress conditions. In AMS circuits these can lead to momentary fluctuations in circuit voltage that may be missed by a compact model and hence cause unpredictable failure. Firstly, multiple aging effects in the devices may have underlying correlations. The generation of new traps during TDDB may significantly accelerate BTI, since these traps are close to the dielectric-Si interface in scaled technology. Secondly, the prevalent reliability analysis lacks a direct validation of the lifetime of devices and circuits. The aging mechanism of BTI causes gradual degradation of the device leading to threshold voltage shift and increasing the failure rate. In the 28nm HKMG technology, contribution of BTI to NMOS degradation has become significant at high temperature as compared to Channel Hot Carrier (CHC). This requires revising the End of Lifetime (EOL) calculation based on contribution from induvial aging effects especially in feedback loops. Conventionally, aging in devices is extrapolated from a short-term measurement, but this practice results in unreliable prediction of EOL caused by variability in initial parameters and stress conditions. To mitigate the extrapolation issues and improve predictability, this work aims at providing a new approach to test the device to EOL in a fast and controllable manner. The contributions of this thesis include: (1) based on stochastic trapping/de-trapping mechanism, new compact BTI models are developed and verified with 14nm FinFET and 28nm HKMG data. Moreover, these models are implemented into circuit simulation, illustrating a significant increase in failure rate due to accelerated BTI, (2) developing a model to predict accelerated aging under special conditions like feedback loops and stacked inverters, (3) introducing a feedback loop based test methodology called Adaptive Accelerated Aging (AAA) that can generate accurate aging data till EOL, (4) presenting simulation and experimental data for the models and providing test setup for multiple stress conditions, including those for achieving EOL in 1 hour device as well as ring oscillator (RO) circuit for validation of the proposed methodology, and (5) scaling these models for finding a guard band for VLSI design circuits that can provide realistic aging impact. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2017
| Identifer | oai:union.ndltd.org:asu.edu/item:46188 |
| Date | January 2017 |
| Contributors | Patra, Devyani (Author), Cao, Yu (Advisor), Barnaby, Hugh (Advisor), Seo, Jae-sun (Committee member), Arizona State University (Publisher) |
| Source Sets | Arizona State University |
| Language | English |
| Detected Language | English |
| Type | Masters Thesis |
| Format | 65 pages |
| Rights | http://rightsstatements.org/vocab/InC/1.0/, All Rights Reserved |
Page generated in 0.0053 seconds