This study investigated the heat transfer within the anode material moving through and heated
by an electric arc. The arc was a low current (< 16 A) atmospheric electric discharge between
a carbon rod cathode, and a moving carbon felt anode. The carbon arc was a low current(<16
A) electric discharge between a cathode constructed of a carbon rod, and a moving carbon felt
anode.
The thermal profile within the anode material was predicted by a system of differential algebraic
equations, adapted from the model developed by (Stark and Fricke, 1993). This set of equations
was run using the software MATLAB R2011b, using a numerical integrator with consideration
taken for sparsity.
The change in degree of graphitisation was then predicted using the thermal profiles developed.
This indicated that while the graphitisation of the surface of the felt exposed to the arc increased
(from about 10% to about 99%) this effect did not penetrate far into the felt. At a depth of 0.3
mm there was very little increase in graphitisation (about 7% increase at slow movement rates,
negligible at standard rates), indicating that this gaphitisation degree was unlikely to explain the
improvement of battery cells produced using this material compared to non–arc treated material.
Vaporisation of carbon due to the arc was then investigated as a possible explanation. With a
similar activation energy to graphitisation a similar profile was obtained.
| Identifer | oai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/9979 |
| Date | January 2014 |
| Creators | Out, Hannu Heijke |
| Publisher | University of Canterbury. Chemical and Process Engineering |
| Source Sets | University of Canterbury |
| Language | English |
| Detected Language | English |
| Type | Electronic thesis or dissertation, Text |
| Rights | Copyright Hannu Heijke Out, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml |
| Relation | NZCU |
Page generated in 0.0021 seconds