The effect of center of gravity (CG) height and lateral and longitudinal off-centering on high-speed roll stability of A-double tractor trailers with 28-ft and 33-ft straight-rail and drop-frame trailers is evaluated through simulation and track testing. The changes in CG position due to the type of trailer (straight-rail vs. drop-frame) and laterally and longitudinally off-centered loads are considered. The simulation results show that imbalanced trailer loading induces roll instability and increases the likelihood of trailer rollover. Additionally, for equal loading conditions, the drop-frame trailers exhibit better roll stability than straight-rail trailers because of the lower CG. The simulation evaluation of 28-ft A-doubles is complemented with track testing of 33-ft trailers in alike (Drop-Drop and Straight-Straight) and mixed (Drop-Straight and Straight-Drop) arrangements of front and rear trailers, for various steering maneuvers that represent highway driving, such as exit ramp, obstacle avoidance, etc. The test trailers include specially designed load frames for emulating a loaded trailer in various loading conditions, outriggers for preventing trailer rollover, and durability structures for withstanding the torsional and bending moments resulting from the tests. Various sensors, including GPS, LiDAR units, accelerometers, string pots, and pressure transducers, are used, along with an onboard data acquisition (DAQ) system, for collecting the necessary data for post-analysis. Analysis of the test data indicates that the Drop-Drop configuration exhibits higher roll stability than the Straight-Straight configuration. For mixed trailers, the Drop-Straight configuration exhibits higher roll stability in exit ramps, but lower obstacle avoidance stability. Equipping the trailers with a roll stability control (RSC) system improves roll stability in terms of increasing the rollover threshold speed and tolerating more aggressive lane change steering maneuvers for A-doubles in various conditions. The RSC performance increases further when the brake application is synchronized between the two trailers to account for any lateral dynamic delay that naturally occurs. A novel interconnected RSC system is proposed to eliminate the lag between the RSC modules with a new control logarithm. The proposed RSC system increases the trailers' roll stability by 16% when compared with independent RSC systems that are commonly used for A-doubles. / Doctor of Philosophy / Commercial trucks play an indispensable role in transporting goods in society. A large percentage of the goods that we use daily or are delivered to our homes are transported on the nation's highways. Most often, the average automobile driver notices the presence of trucks on highways, at times with a bit of disdain. The public's perception appears to be formed by the fact that accidents involving commercial trucks are more publicized because they can cause more property damage, injuries, or even fatalities. The primary thrust of this research is to make the nation's highways safer by offering a better understanding of the dynamics of trucks with double trailers that are operated with a higher frequency on public highways. The double trailer configuration is often favored because of its larger cargo capacity and high modularity. However, their roll dynamics are not as well understood as the conventional tractor-semitrailers.
Understanding the dynamics of double-trailer trucks is undoubtedly the very first step toward preventing or reducing the traffic accidents caused by rollovers. This study provides detailed analysis of roll dynamics for double trailers with imbalanced payloads. It also evaluates the effect of different types of trailers, such as drop-frame trailers (those with a "belly" in the mid-section of the trailer) and straight-rail trailers (those without a "belly") on their rollover propensity. The commercialized RSC system is evaluated for its effectiveness on the double-trailer truck. The evaluations are based on over 1,000 sets of tests in highly controlled conditions at the Transportation Research Center (TRC), a special facility for vehicle dynamic assessment in East Liberty, Ohio. It is found that the rollover dynamics of trucks with double trailers can be improved by having an awareness of the most favorable trailer arrangements according to their types of trailers and type of steering (exit-ramp or obstacle avoidance). In addition, this study provides the analysis of the commercialized RSC system for its effectiveness on the double-trailer truck. Lastly, a novel RSC system is proposed to further improve the effectiveness of the original RSC system.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/113013 |
| Date | 03 January 2023 |
| Creators | Zheng, Xiaohan |
| Contributors | Mechanical Engineering, Ahmadian, Mehdi, Southward, Steve C., Abbas, Montasir M., Barry, Oumar, Taheri, Saied |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0022 seconds