Mask Projection Microstereolithography (MPSLA) is an additive manufacturing process capable for fabricating true three-dimensional microparts and hence, holds promise as a potential micro-fabrication process for micro-machine components. With only a few MPSLA systems developed and studied so far, the research in this field is inchoate and experimental in nature. The process of curing a micropart using an MPSLA system has not been analytically modeled and no literature on process planning for MPSLA is available. In order to employ the MPSLA technology for microfabrication, it is necessary to model its part building process and formulate a process planning method to cure dimensionally accurate microparts.
As a part of this thesis, an MPSLA system is designed and assembled. The process of curing a single layer using this system is analytically modeled as the Layer cure model. The Layer cure model is formulated in two steps. First, the irradiance received by the resin surface is modeled as a function of the system parameters (Irradiance model). Then, the resin used in the system is characterized to experimentally determine its working curve. The Irradiance model and the resin characterization enable us to compute the dimensions of any layer cured using our MPSLA system in terms of the process parameters. The Layer cure model has been validated by curing test layers on our system.
Finally, the Layer cure model has been inverted to formulate a process planning method to cure layers of the required dimensions. Using this process planning method, it is possible to cure layers within a dimensional error of 3%.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/4943 |
| Date | 06 December 2004 |
| Creators | Limaye, Ameya Shankar |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Format | 8810375 bytes, application/pdf |
Page generated in 0.0099 seconds