Bidirectional power switching devices are needed in many power management applications, particularly in lithium-ion battery protection circuitry. A monolithic bidirectional power switch fabricated with a simplified CMOS technology is introduced in this dissertation. Throughout the design process, ISE TCAD tool plays an important role. Design variables are carefully analyzed to improve the device performance or yield the best trade off. Optimization is done with the help of TCAD simulation and theoretical calculations. The device has been successfully fabricated using simplified 0.5 micron CMOS process. The experimental result shows a breakdown voltage of 25V. Due to the interdigitated source to source design, the inter-terminal current flowing path is effectively reduced to a few microns. The experimental result shows an ultra low specific on resistance. In comparison with other bi-directional power semiconductor switches by some major semiconductor manufacturers, the proposed BDS device has less than one half of the specific on resistance, thus substantially lower on state power loss of the switch. The proposed BDS device has a unique NPNPN structure, in comparison with NPNP structure, which is the analytical structure for CMOS latch-up, the proposed device inherently exhibits a better latch up immunity than CMOS inverter, thanks to the negative feed back mechanism of the extra NPN parasitic BJT transistor. In order to implement the device into simulators like PSPICE or Cadence IC Design, a compact model named variable resistance model has been built. This simple analytical model fits quite well with experimental data, and can be easily implemented by Verilog-A or other hardware description languages. Also, macro modeling is possible provided that the model parameters can be extracted from experimental curves. Several advanced types of BDS devices have been proposed, they exceed the basic BDS design in terms of breakdown voltage and /or on resistance. These advanced structures may be prominent for further improvement of the basic BDS device to a higher extend. Some cell phone providers such as Nokia is already asking for higher breakdown voltage of BDS device, due to the possibility of incidentally insert the battery pack into the cell phone with wrong pin polarity. Hopefully, the basic BDS design or one of these advanced types may eventually be implemented into the leading brand cell phone battery packs.
| Identifer | oai:union.ndltd.org:ucf.edu/oai:stars.library.ucf.edu:etd-4165 |
| Date | 01 January 2007 |
| Creators | Fu, Yue |
| Publisher | STARS |
| Source Sets | University of Central Florida |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Electronic Theses and Dissertations |
Page generated in 0.0028 seconds