Return to search

The Nature of Surface Oxides on Corrosion-Resistant Nickel Alloy Covered by Alkaline Water

A nickel alloy with high chrome and molybdenum content was found to form a highly resistive and passive oxide layer. The donor density and mobility of ions in the oxide layer has been determined as a function of the electrical potential when alkaline water layers are on the alloy surface in order to account for the relative inertness of the nickel alloy in corrosive environments.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/610223
Date January 2010
CreatorsCai, Jiaying, Gervasio, D. F.
ContributorsDepartment of Chemical Engineering, Arizona State University, Tempe, AZ, USA, Department of Chemical Engineering, University of Arizona, Tucson, AZ, USA
PublisherSpringerOpen
Source SetsUniversity of Arizona
LanguageEnglish
Detected LanguageEnglish
TypeArticle
Rights© The Author(s) 2010. This article is published with open access at Springerlink.com
Relationhttp://www.nanoscalereslett.com/content/5/3/613

Page generated in 0.0021 seconds