Return to search

Modeling of QE, I-V Characteristics of MSM (Metal-Semiconductor-Metal) Mercuric Iodide Thin Films with MEDICI<sup>TM</sup>

Mercuric Iodide is the most promising of all semiconductor materials currently under investigation for use as radiation detectors at room temperature. While substantial studies have been conducted on single crystal HgI2, polycrystalline HgI2 remains a comparatively less studied form.
The HgI2 films are deposited on TEC-15 LOF glass with a Tin Oxide (SnO2) coating which acts as the growth surface and front contact. The back contact, Palladium (Pd), is deposited by sputtering through a shadow mask. The films are circular in shape with an approximate diameter of 2.5 cm and thicknesses ranging from 50-600 micro m. The film has seven contact points defined by Pd electrodes for spectral response(SR) and I-V measurements. Measurements were done on the film with a visible light source.
Numerical modeling helps us understand device properties and processes that take place in operation of the device. The focus of this work was to identify loss mechanisms in photoresponse, reveal fundamental device properties, and develop a quantitative device model for MSM HgI2 thin films using the DC Device modeling simulation tool MEDICI ™. The values for input parameters were chosen from literatutheory and reasonable estimates. Comprehensive studies were performed to investigate the sensitivity of SR and light I-V characteristics to each input parameter. Surface&Bulk recombinations have been investigated in this thesis. A Single, homogeneous region with all possible combinations of carrier mobilities, surface and bulk recombination parameters was not able to explain completely the measured SR. A Two-region model with the first region (0-0.5) μ m being surface&bulk recombination dominated, and the second (0.5-300) μ m bulk recombination dominated, was able to match the complete measured SR of current devices. The key parameters determined from the simulations are the mobilities, bulk lifetimes and surface-recombination velocities at the front contact for both carriers. These are consistent with expectations based upon known single crystal properties

Identiferoai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-2228
Date08 November 2004
CreatorsRupavatharam, Vikram
PublisherScholar Commons
Source SetsUniversity of South Flordia
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceGraduate Theses and Dissertations
Rightsdefault

Page generated in 0.002 seconds