Return to search

La production d'hydrogène via la valorisation de la biomasse par reformage catalytique du méthanol / Hydrogen production via biomass by catalytic reforming of methanol

Dans le but d'étudier la production d'hydrogène via la réaction de vaporeformage catalytique du méthanol et de déterminer les différents paramètres influençant la réaction, la performance des catalyseurs Cu-Zn/CeO₂-Al₂O₃ a été évaluée. L'imprégnation du cuivre sur la cérine ou l'alumine, montre de meilleurs performances catalytiques que le zinc imprégné sur ces mêmes supports. En présence de la cérine, l'activité a été liée à la dispersion des espèces Cu²⁺ isolés en interaction avec la matrice, qui se réduisent dans la phase de prétraitement du catalyseur. En présence de l'alumine, des espèces spinelles CuAl₂O₄ très stables et non réduites ont été formées rendant les catalyseurs moins actifs. Concernant les catalyseurs à base de cuivre imprégné sur l'oxyde mixte 10Ce10Al, la présence de l'alumine a favorisé la dispersion de la cérine à sa surface améliorant ainsi l'échange d'oxygène entre la phase active et le support sans marquer une influence sur l'espèce active. Les agglomérats de CuO formés sur les catalyseurs à forte teneur en cuivre ont contribué à la diminution de formation de sous produits durant la réaction. L'effet promoteur du zinc a été révélé en stabilisant le cuivre réduit au cours du test sous forme d'espèces Cu⁺ qui sont les plus actives dans la réaction de vaporeformage du méthanol. Tous les catalyseurs à base de cuivre n'ont révélé aucune présence de coke à leur surface, contrairement aux catalyseurs à base de zinc où des espèces carbonées ont été identifiées. La désactivation du catalyseur avec le temps a été attribuée à la formation de ces espèces, qui bloquent l'accessibilité des sites actifs du catalyseur. / In order to study the hydrogen production via the catalytic steam reforming of methanol and to determine the influence of different parameter on this reaction, the performance of the Cu-Zn/CeO₂-Al₂O₃ catalysts was evaluated. The impregnation of copper over ceria or alumina has shown better catalytic performance than the impregnation of the zinc on the same supports. In the presence of ceria, the catalytic activity has been related to the dispersion of isolated Cu²⁺ species in interaction with the matrix, which were reduced during the pre-treatment phase of the catalyst. In the presence of alumina, stable and unreduced CuAl₂O₄ spinal species were formed, leading to a lower catalytic activity. Concerning the copper based catalysts impregnated on 10Ce10Al mixed oxide, the presence of alumina has promoted the dispersion of the ceria that enhances the oxygen exchange between the active phase and the support without influencing the active phase. The agglomerated CuO species formed in the catalysts with the high copper content have contributed to lower the by-product formation during the reaction. The promoter effect of the zinc was revealed by the stabilisation of the reduced copper into Cu⁺ species that are the most active species in the steam reforming of methanol reaction. No coke formation was revealed on the copper based catalysts, unlike the zinc based catalysts where carbon species were identified. The catalytic deactivation with time on stream was attributed to the formation of those species that blocks the accessibility of the catalytic active sites.

Identiferoai:union.ndltd.org:theses.fr/2011DUNK0409
Date09 December 2011
CreatorsMrad, Mary
ContributorsLittoral, Abi Aad, Edmond
Source SetsDépôt national des thèses électroniques françaises
LanguageFrench
Detected LanguageFrench
TypeElectronic Thesis or Dissertation, Text

Page generated in 0.0031 seconds