Return to search

TIME DEPENDENT CHANGES IN MICRO-HARDNESS OF BIOACTIVE CEMENTS

The objective of this study was to compare time dependent micro-hardness of several bioactive cement compositions as compared to that of non-bioactive cement, a conventional glass ionomer. Materials & Methods: Three bioactive materials Ceramir Crown & Bridge Cement (CCB), Mineral Trioxide Aggregate (MTA), Biodentine (BD)], and a glass ionomer cement, Fuji I luting cement (F1), were utilized in this study. Samples of the materials were prepared in a standard cylindrical mold 1.5 mm in height and 12.0 mm in diameter and stored in Phosphate-Buffered-Saline (PBS) at 37 degrees C. prior to testing to determine Vickers micro-hardness in a CSM micro-indentation testing device. Micro-hardness values were collected via 2 x 2 micro-indentation matrices on the exposed surfaces of the specimens. All materials were tested at 24 hours and 2 months and 11 + 1 month's incubation time. The bioactive materials displayed significant differences in Vickers hardness as a function of storage time as compared the Vickers hardness values over the similar timeframe for the control material, the glass ionomer material Fuji 1. The control glass ionomer cement did not displayed significant changes in Vickers hardness after prolonged liquid storage. The experimental bioactive materials both demonstrated long-term trends with significant increases (CCB) and decreases (Biodentine) in Vickers hardness after storage in the simulated body fluid (PBS). The mean Vickers hardness of the calcium aluminate/glass ionomer (CCB) material was significantly greater than the mean Vickers hardness values for the other three materials tested at all time-points evaluated. The conclusions of this study were as follows: Unlike conventional glass ionomer cement, both the calcium silicate and calcium aluminate/glass ionomer cement displayed significant changes in surface micro-hardness after prolonged storage in a simulated body fluid (PBS) that has been demonstrated to induce the formation of a surface bioactive layer. The calcium silicate cement had a significant reduction in surface micro-hardness over a period up to year; while the calcium aluminate/glass ionomer cement displayed a significant increase in surface micro-hardness over that same time period. The formation of and changes in the bioactive surface layers formed on these materials may account for changes in the micro-hardness of these bioactive materials. / Oral Biology

Identiferoai:union.ndltd.org:TEMPLE/oai:scholarshare.temple.edu:20.500.12613/2548
Date January 2015
CreatorsAlmutairi, Jasi
ContributorsJefferies, Steven R., Boston, Daniel, Godel, Jeffrey H., Whitaker, Eugene J.
PublisherTemple University. Libraries
Source SetsTemple University
LanguageEnglish
Detected LanguageEnglish
TypeThesis/Dissertation, Text
Format40 pages
RightsIN COPYRIGHT- This Rights Statement can be used for an Item that is in copyright. Using this statement implies that the organization making this Item available has determined that the Item is in copyright and either is the rights-holder, has obtained permission from the rights-holder(s) to make their Work(s) available, or makes the Item available under an exception or limitation to copyright (including Fair Use) that entitles it to make the Item available., http://rightsstatements.org/vocab/InC/1.0/
Relationhttp://dx.doi.org/10.34944/dspace/2530, Theses and Dissertations

Page generated in 0.0065 seconds