This thesis describes a way to achieve higher conversion rates of sugars from lignocellulosic biomass that can then be used for cellulosic ethanol production. Using oat hulls as the biomass, several chemical and physical pretreatment techniques were explored to overcome the recalcitrance and allow access to cellulose and hemicellulose. Experimentation with enzyme cocktails and dosing was done to obtain the highest conversions of cellulose and xylan to produce sugars. High solids-loading of the substrate, 14-16%, enabled higher conversion rates and would amount to lower cost of production in a commercial facility; however, end-product inhibition by the accumulation of inhibitors is also realized. To remove inhibition, a solid-liquid separation step was implemented which allowed enzymes to operate at a higher efficiency. The best combination of pretreatment and enzymatic hydrolysis led to a glucose of 89% and xylose yield of 84%, for trials conducted in a 20L bioreactor.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/25893 |
| Date | 13 January 2011 |
| Creators | Perruzza, Amanda |
| Contributors | Saville, Bradley |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0023 seconds