<p>This thesis was completed as a part of the project "Microwave wireless Communication </p><p>Link". In this thesis, the requirements to develop base band part for the transceiver were </p><p>studied, including, usage of proper hardware equipment as well as software </p><p>programming. A signal injector performed as a hardware interface between the Analog </p><p>part and the Digital (base band) part of the tranceiver, whereas, a PCI card acted as a data </p><p>acquisition device for base band part. A programming language was required to build </p><p>such a software, able to successfully represent a transmitter and a receiver. All the </p><p>features were found in Labview (Laboratory Virtual Instrument Engineering Workbench) </p><p>introduced by National Instruments in 1980s. A modern version of Labview i.e. version </p><p>7.1, was used in this thesis, it views the software as a virtual instrument to automate and </p><p>measure the values passed from the connected hardware. Labview provides a graphical </p><p>development environment, which is modular and parallel in nature, and uses an efficient </p><p>G compiler. A coherent base band receiver using matched filter was implemented, and a </p><p>base band transmitter using NRZ-L digital encoding scheme and QPSK modulation </p><p>scheme was developed.</p>
Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:hh-233 |
Date | January 2006 |
Creators | Jamil, Faisal |
Publisher | Halmstad University, School of Information Science, Computer and Electrical Engineering (IDE), Högskolan i Halmstad/Sektionen för Informationsvetenskap, Data- och Elektroteknik (IDE) |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, text |
Page generated in 0.1223 seconds