Improvements to the properties of recycled rubber, by developing a more selective breakdown process, is an important issue and a global challenge. Devulcanization is the most promising way to achieve this. It is a process which aims to totally or partially cleave monosulfidic (C-S-C), disulfidic (C-S-S-C) and polysulfidic (C-Sx-C) crosslinks of vulcanized rubber. In this study, the devulcanization of sulfur-vulcanized natural rubber with a variety of diphenyldisulfides has been studied using 2,3-dimethyl-2-butene and squalene as model compounds, vulcanized by sulfur and 2-bisbenzothiazole-2,2’-disulfide. 2-aminodiphenyldisulfide; 4-amino-diphenyldisulfide; bis(2-benzamido-)diphenyldisulfide and 2,2’-bithiosalicylic acid were used as aromatic disulfides devulcanization agents. Thermal analysis was used to investigate interactions between various combinations of curatives in the vulcanization systems in the absence of model compounds. Thermogravimetric analysis was used to detect mass changes during vulcanization and whether the samples decompose/evaporate so as not to contaminate differential scanning calorimetry instrumentation. Differential scanning calorimetry was used to investigate reactions occurring between curatives. Comparison of reversing and non-reversing signals in modulated experiments are suggestive of reactions between devulcanization agents and sulfur, and accelerators Vulcanization of the model compounds were performed in 10m evacuated sealed glass ampoules placed in an oil bath at 160 °C and agitated for the duration of vulcanization. After 60 min the ampoules were removed and quenched. These were then devulcanized by exposure to a devulcanization agent in a sealed ampoule at 180 for 60 min. Crosslinked 2,3-dimethyl-2-butene species were isolated and analysed by reversed phase high performance liquid chromatography. Particular attention was paid to changes in the number of sulfur atoms in the crosslinks. Results indicate that of the devulcanization agents tested 4-amino-diphenyldisulfide was the most effective. No detrimental effect on devulcanization efficiency was caused by the substitution of a basic amino group with an acidic carboxylic acid group Gel permeation chromatography was performed on devulcanized squalene crosslinks using a tetrahydrofuran eluent. GPC investigations with squalene were less effective than HPLC experiments with 2,3-dimethyl-2-butene at evaluating the relative efficiency of individual devulcanization agents. Results were, however, consistent with 4-amino-diphenyldisulfide again being the most efficient devulcanization agent.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:27834 |
| Date | January 2017 |
| Creators | Boyce, Annemè |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MSc |
| Format | xiv, 117 leaves, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0022 seconds