The effects of coating formulation on thermal characteristics of coating layers were systematically studied for xerographic toner fusion on coated papers. Model coatings were formulated using three types of ground calcium carbonate and one kaolin pigments, each mixed with 6, 10, 18, and 25 pph of styrene butadiene latex binder. Porosity was found to be a key parameter for coating thermal conductivity adjustment, and was determined by the latex concentration. The particle size distribution and morphology of pigments also affect the overall thermal characteristics of coating layers. Print qualities on model coated papers were evaluated by print gloss measurement, toner adhesion test, and pair-wise visual ranking, and it was proved that print gloss is reduced with increasing bulk thermal conductivity of coating layers. The coating layer consisted of Covercarb HP pigment and 10 pph of latex was found to have the best performance in the three print quality evaluation tests.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/18813 |
| Date | 15 February 2010 |
| Creators | Liang, Chong |
| Contributors | Yan, Ning |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0018 seconds